Skip to main content

3D printed device saves baby’s life

kaiba
Image used with permission by copyright holder

Wait, wait, we know what you’re thinking. You’re so over 3D printing. Guns, pizzas, iPhone cases, we’ve seen it all and the stories proclaiming the greatness of this Next Big Thing make the trend grow old quick. But we promise this hype’s worth the read: Without a 3D printer, a baby not even six months old would have died.

Kaiba Gionfriddo, who was born with a life-threatening respiratory disorder called trachebronchomalacia, is the infant saved by such technology. Every day, there was a period where Kaiba stopped breathing as his collapsed bronchus blocked the flow of air to his lungs, and doctors involved with the family were not optimistic about his future. “Quite a few doctors said he had a good chance of not leaving the hospital alive,” said Kaiba’s mother, April. “At that point, we were desperate. Anything that would work, we would take it and run with it.”

It turned out that what could work ended up being research being carried out at the University of Michigan into bioresorbable devices. After being contacted by Kaiba’s doctors, UofM’s associate professor of pediatric otolaryngology Glenn Green and professor of biomedical engineering and mechanical engineering (and associate professor of surgery) Scott Hollister became involved in the case.

“We reasoned that the localized tracheobronchomalacia was the cause of this physiological abnormality,” the doctors write in the paper supporting their actions, “and made a custom-designed and custom-fabricated resorbable airway splint. Our bellowed topology design, similar to the hose of a vacuum cleaner, provides resistance against collapse while simultaneously allowing flexion, extension, and expansion with growth.”

The design was created using a CT scan of Kaiba’s trachea, with the computer model then used to create a 3D printed splint. The device is made from a material called polycaprolactone, which will break down and be absorbed by Kaiba’s body after three years – at which point, doctors believe, the body will have managed to grow an unrestricted airway by itself thanks to the support offered by the splint.

Of course, the design and construction of the device were hardly the only problems involved in this case. Before the splint could be installed, the team at the University of Michigan had to apply for (and were, obviously, granted) emergency clearance from the U.S. Food and Drug Administration because the process was so unusual.

More than a year later – the surgery to put the splint took place in February 2012 – and signs are that everything is proceeding as planned. Three weeks after the surgery, Kaiba was taken off the ventilator, and has had no problem breathing ever since. Suddenly, the days of silly 3D-printed burritos seems so far behind.

Editors' Recommendations

Graeme McMillan
Former Digital Trends Contributor
A transplant from the west coast of Scotland to the west coast of America, Graeme is a freelance writer with a taste for pop…
3D-printed ventilator valves help out Italian hospital rocked by coronavirus
3d printed ventilator valves img 20200314 223845

What do you do when a crucial part of a lifesaving piece of medical equipment is in hopelessly short supply? You 3D print yourself a supply of them, of course. At least, that’s what happened at a hospital in Brescia, Italy, rocked by the outbreak of the coronavirus pandemic.

While ventilator breathing machines are not exactly in abundant supply, medical professionals found that the valves connecting the machine to the patient were even scarcer. This is due to the fact that they have to be regularly swapped out between patients, giving the component a very short life span.

Read more
3D-printing technique produces tiny, highly detailed objects in seconds
The new fast 3D printing technique developed by researchers at EPFL.

The new fast 3D printing technique developed by researchers at EPFL. Ecole Polytechnique Federale de Lausanne

3D printing has incredible potential for both research and home uses, but it has some limitations. The current technology takes some time to produce an object, and it produces hard structures only. But now, researchers from the Swiss Federal Institute of Technology Lausanne (EPFL) have come up with a method for printing highly-precise miniature objects with different textures.

Read more
This 3D-printed four-legged robot is ready to take on Spot — at a lower price
3d printed ghost robotics origin

New Spirit 40: First Steps & Quick Run

Most people reading this will be familiar with four-legged robots such as the dog-inspired Spot robot developed by Boston Dynamics or Swiss robotics company ANYbotics’ ANYmal. But while there’s no doubt that such robots are supremely impressive, they’re also expensive -- which could limit their application in certain domains.

Read more