Skip to main content

Researchers develop next-gen laser based on fluorescent jellyfish proteins

jellyfish laser tech gfp fluorescence
GatherLab, University of St Andrews
Researchers at Scotland’s University of St. Andrews have demonstrated the world’s first polariton laser based on lab-grown, fluorescent jellyfish proteins — which could help trigger major advances in fields like optical computing.

“I’ve always been fascinated by the material properties of fluorescent proteins,” said Malte Gather, a professor at the University of St. Andrews, who helped invent the laser. “They have a very special molecular structure that is unlike the structure of any of the synthetic materials that we use.”

Polariton lasers are different in their physics from conventional lasers, and potentially more efficient at generating light at low energy levels. However, they have previously proven unsuitable for real-world applications. One reason for this is the cryogenic temperature they require to work effectively.

“Polariton lasers have had to be operated at very, very low temperatures — below the temperature at which nitrogen gas becomes a liquid — which is not very convenient,” Gather explained.

These constraints are one of the areas the new jellyfish protein-based improves on previous polariton lasers, since it can be operated at room temperature.

In doing so, it could have a profound impact on optical computing as we know it. “In optical computing it’s important to reduce the amount of energy that is required to encode a single bit using a laser,” said Gather. “In this context, having a laser that requires significantly lower energy would be very important. That’s something which is driving the polariton laser field.”

Another application for the laser, he suggested, would be to create a “bio-compatible, bio-implantable light source.” This tiny laser could even be embedded in individual cells, and due to its protein-based nature would not be rejected by them. At the same time, its low energy operation would not risk damaging surrounding tissues.

“Having very small lasers that one can fit into living things allows us to use them as a bar code of sorts,” Gather noted. “It’s well known that a laser emits a very narrow emission spectrum, but it’s also possible to have lasers emit different emission spectrums. This means that having lasers all emitting a slightly different wavelength into cells or tissue, it should be possible to use them as an identifier by measuring the spectrum.”

As to a rollout of this new technology, Gather suggested that we’re looking at a five- to 10-year time frame.

“This is beyond the point of just being hypothesized,” he said. “We have demonstrated that one can make a polariton laser based on fluorescent proteins. What we haven’t done yet is to use the laser to do anything. For the optical computing applications, I expect that we’ll be able to see proof-of-principle demonstrations within the next four to five years. The same timescale is probably true for the bio-applications, while it could be another half-decade after that until people start to use this as a tool.”

Editors' Recommendations

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
Researchers create ‘missing jigsaw piece’ in development of quantum computing
Spin qubit device being connected to circuit board in preparation for measurement.

Spin qubit device being connected to circuit board in preparation for measurement. Serwan Asaad

The promise of quantum computing is incredible, allowing huge leaps in the speed and efficiency of computation. However, even though the idea has been around for decades, putting the concept into practice is a massive engineering challenge. Now, researchers from the University of South Wales Sydney say they have made a leap forward and found the "missing jigsaw piece" to improve the architecture of quantum computing chips.

Read more
Optical vs. laser mouse
Logitech G403 Prodigy

Finding a mouse that achieves the perfect balance between sensitivity and accuracy might seem next to impossible. Laser-based mice offer high sensitivity, but they tend to cause jittering. On the flip side, optical mice use LED technology with lower sensitivity, allowing for more accurate movement.

Choosing the best mouse for you can be a challenge. Luckily, we can help you decide based on your budget, the surface you’re using, and the types of activities you’ll need your mouse for.
Guess what? All mice are optical
Modern mice are basically cameras. They constantly take pictures, although instead of capturing your face, they grab images of the surface underneath. These images aren’t meant for posting on social media but instead are converted into data for tracking the peripheral’s current location on a surface. Ultimately, you have a low-resolution camera in the palm of your hand, otherwise known as a CMOS sensor. Combined with two lenses and a source of illumination, they track the peripheral’s X and Y coordinates thousands of times per second.

Read more
Model based on fusion energy research explains why sunspots peak every 11 years
sunspots fusion model 211762 web 1

Sunspots can be seen in this image of solar radiation. Each sunspot lasts a few days to a few months, and the total number peaks every 11 years. The darker spots accompany bright white blotches, called faculae, which increase overall solar radiation. NASA/Goddard/SORCE

Of all the mysteries about our sun, one of the most perplexing is the cycle of sunspots. These dark patches on the sun's surface appear for a few weeks at a time before fading again, and for some reason, they increase in frequency to a peak every 11 years. Now, a new study aims to explain this 11-year cycle by modeling the movement of plasma within the sun.

Read more