With the two-year research and development, we recently develop an Innovative Finger Touch Technology—Laser Image Calibration Technology (LICT). This technology has been adopted in Portable Finger Touch Interactive Whiteboard, Interactive Module for LCD Screen, and Interactive Module for Projector. Before the LICT, Finger Touch Interactive Whiteboard mostly adopts Infrared or Pressure Sensitive or Ultrasound or Optical Image Technology, but none of above technology can achieve ‘portable’.

Features:

1. Finger Touch and Portable: any other technology cannot support.

2. Automatic Calibration: any solid Interactive Whiteboard cannot support.

3. Remote Control: any solid Interactive Whiteboard cannot support.

How it works

FP Board can be attached on any flat surface like wall, Board, TV LCD, etc. FP Board emits one virtual surface which is about 1mm thick and cannot see by the naked eyes. This surface is parallel with the projection screen from 1-2mm. when the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the sensor at the top. Computer will figure out the position of the mouse by high accurate calculation of light position.

Innovation

Finger multi-touch and portable are integrated in one product.

Technology Application

1, Finger Touch Portable Interactive Whiteboard

This product can turn any flat wall or common board into a finger-touch board, size from 40’’-85’’.

2, Turn LCD screen into touchable

No need frame, just put a common glass onto a common LCD screen and install our FP Board on the glass, then it can turn the LCD screen into touchable. It can support the active size 40’’- 85’’. No cost increase when the size becomes bigger.

3, Ultra short focus (80’’/ 35cm) Finger Touch Interactive Projector

Integrated the module of the FP Board into any projector, and then the projector can be converted into finger touch. No need to use the entity interactive whiteboard.

Functions and advantages

1. Support finger touch: Use the finger instead of pen to write on whiteboard/wall/LCD Panel or operate computer.

2. Support multi-touch: two or more people write simultaneously, maximum ten people can write at the same time without interference.

3. Support Automatic Calibration: Automatic calibrations within 5 seconds, easy to operate, achieve high accuracy calibration.

4. Support Remote Control: use the wireless laser pen instead of mouse to achieve remote control from away, the pen can achieve the function of left or right click.

5. Support the ordinary eraser to operate: use the eraser or the hand to erase the words in the application software window.

6. Portable and easy to install: total weight is less than 1kgs and the device can be installed on the wall with adhesive tape or screws. No skills needed.

Step 1 Step 2 Step 3