Home > Home Theater > TV calibration 101: How to tune up your new HDTV

TV calibration 101: How to tune up your new HDTV

Whether you spend $400 or $40,000 on a new TV (or video projector), it is a sure bet that your new display needs some adjustments. It seems counter-intuitive, doesn’t it? You’d think that the manufacturers would set up their TVs to put out a beautiful, accurate image right out of the box. Aren’t they supposed to be the experts?

No matter how much of a novice you are, there is some level of video adjustment you can handle yourself.

Sure, but the manufacturers’ first priority is to get their TVs and projectors sold to you, and they have a lot of competition to do battle with on the showroom floor. For that reason, they set their TVs up for success at the factory so that when they hit the showroom floor, they’ll grab your attention and hold it. If you’ve spent any time looking at a wall of TVs, you’ve noticed that some models are much brighter than others, while others still have amazingly brilliant colors that, at that time, delight the senses. How do they do it? Usually, by cranking up almost every available picture setting to its absolute maximum.

While this tactic may work well on the showroom floor, it is no good for your living room, bedroom or home theater. In order to get a truly fantastic picture with accurate colors, excellent contrast and realistic texture and dimension, you need to adjust your TVs picture settings.

No matter how much of a novice you are when it comes to electronics, there is some level of video adjustment you can handle yourself. If you absolutely must have the best, feel free to call a pro. For the rest, we offer our TV Tune-Up guide to help get you through some of the basic and intermediate self-service TV settings so you can sit back and enjoy your new TV with the knowledge that it looks as close as possible to a professionally calibrated display.

Pick your process

This guide is designed to help those who want to do a manual calibration without the aid of a calibration disc. Actually, we recommend you start with an “eye-ball” calibration first, even if you do intend to use a calibration disc for help. It will get you closer to your ideal settings and facilitate faster fine-tuning later. There are a number of video calibration discs available, but we have two favorites. The first, and most accessible for the average Joe, is the Disney WOW: World of Wonder Blu-ray disc. While it may be hard for proud videophiles to admit it, this Disney disc is both comprehensive and intuitive, and the more we use it, the more we like it. As a bonus to all of the display optimization stuff, it comes with several beautiful HD clips of well-liked Disney and Pixar movies, perfect for enjoying your well-adjusted new TV.

Disney WOW: World of Wonder

For the more technically inclined, we like the Spears and Munsil High Definition Benchmark Blu-ray Edition. In our experience, this is one of the easiest to use calibration and testing discs available to the enthusiast. It provides clear, easy to understand on-screen instructions as well as online support, and does away with the often corny and cheesy voice-overs associated with other calibration discs. The only downside is that it doesn’t include audio calibration, but if audio help is what you need, we’ve got you covered here.

Other frequently recommended video calibration discs include Digital Video Essentials: HD Basics,  and Avia II Guide to Home Theater.

If you want to try a completely different approach – one which doesn’t involve a disc, but rather your iPhone or iPad, check out THX’s Tune-Up app. It connects to your TV via HDMI (separate adapter is necessary) and uses your iOS device’s camera to assist you. You can learn more about the app right here.

Getting ready

Before we launch into making any changes in your TV’s settings, there are a few things we need to do first to make sure the stage is set for a hassle-free and successful calibration.

Pick a source and source material

Our top source recommendation is a Blu-ray disc player or next-gen gaming console. These devices deliver a full 1080p image, and that sort of detail will come in handy later. Plus, calibrating your TV for the best possible picture source right out of the gate just makes sense. If you don’t own a Blu-ray player, an and HD cable/satellite box with DVR are your best alternatives. The key is to get the best source possible while maintaining the ability to pause images as needed. Whatever source you choose, you need to you connect it to your TV via HDMI cable.

For source material, we recommend a high-definition movie or TV program that was natively recorded in HD. Pick something that has a good blend of bright and dark scenes as well as a good amount of color. Deadliest Catch, while an entertaining TV show, is not ideal for use during calibration because colors are generally very muted and monotone. Computer-animated films can make excellent sources of vivd color and detail information, but live-action films are going to be better for judging more subtle aspects, like skin tone accuracy.

Pick a picture mode

Your TV will come with several different picture modes and presets. These are usually labeled sports, games, vivid, movie, cinema or standard – some will even get specific as to which type of sport. Most of these are horribly out of whack. Steer clear of sports and vivid or “bright” modes, as these are consistently the worst offenders and, because they are so overly bright, will reduce the long-term life of your TV. The movie, cinema or standard settings serve as the best launchpads for creating your own custom settings. They may appear a little dark for your taste at first, but we’ll be fixing that. Once your adjustments are made, they may be saved under a “custom” setting rather than altering the factory pre-set. Those that do alter the factory pre-set will usually provide a factory reset option.

Stuff to turn off

Today’s TVs come with a long list of different processors that are intended to enhance images in one way or another. While some of these can prove valuable, it is best to defeat them while calibrating. You can always turn them back on later when you’re finished. Keep in mind that a Blu-ray disc image is natively very high quality and requires little to no processing help anyway.


The very first thing we suggest you disable is the motion smoothing feature. This may be marked with names like MotionFlow, CineMotion, TrueMotion, CineSpeed 120Hz, 240Hz, 480Hz or something else along those lines. These processors make everything you watch look like a soap opera and defeat the cinematography that makes films look amazing.

Other picture enhancements that can be disabled may include edge correction, digital noise reduction (DNR) MPEG error correction, flesh tone, dynamic contrast, black enhancement, HDMI black level, etc.

Making your adjustments

In the following section, we’ll cover most of the basic adjustments that users can make without breaking into the locked “service settings” of your TV. We’ll talk a little about what these adjustments do and what to look at to make sure you’ve got the best setting.

Note: We highly recommend that only qualified service technicians get into the locked service menus. Just one adjustment in the wrong direction can throw an array of other settings off – that’s why they’re locked!


This adjustment controls the intensity of the backlight on an LCD/LED TV. For those who have their TV in a dark room or basement, this setting won’t need to be terribly high. For those in brighter rooms, more backlight intensity will be desired. Try to avoid making this adjustment while sun is shining directly on the TV, as this will result in an unnaturally high setting. Instead, make your adjustments when room light is at its average and pick a program or movie scene with a lot of white in it – a daylight scene on a snow-covered mountain, for example. If after watching the scene for 10 minutes you begin to squint, the backlight is too strong. Reduce the backlight and repeat until you are happy.


The term “brightness” is a little misleading, since the setting actually has more to do with the black level of your TV. Setting the brightness too high will result in grayed out blacks and a loss of dimension. When brightness is set too low, you will lose detail in dark areas of the screen. The easiest way to adjust the brightness is to use the black letterbox bars at the top and bottom of a movie. These bars are meant to be dead black, and will usually be darker than the black background often found in movie credits. Pause on your scene of choice and turn the brightness up until the letterbox bars appear grey. Then, reduce the brightness just until the black bars are totally black. Once this is done, find a scene that involves large dark sections that still contain detail. The newer Batman movies are great for this, as are the Harry Potter films or Prometheus. If the brightness is set too low, you’ll be missing details in dark scenes and shadowy areas. Keep in mind that there is such a thing as “blacker than black.” Not all details in shadows are meant to be visible.


Contrast, also referred to as “picture”  in some settings menus, is, like brightness, a misleading term because this adjustment actually deals with the brightness and detail within the white portions of an image. With plasma displays, the contrast or picture settings will have a direct effect on the overall brightness of the display. If set too high, power consumption will go way up and you’ll notice your TV puts out a lot more heat.

Ultimately, your contrast setting will come down to personal preference, but we advise you resist the urge to simply jack the contrast up. Find a scene with a bright, white image contained in it and hit the pause button. Adjust the contrast to the point where the white object is bright, but still contains detail and crisp edges. A good starting place is the halfway mark. From there you should have no problem finding the setting that suits you. Note: You may have to bounce back and forth between the contrast and brightness settings to find the optimum combination. This is normal and can take a little time, but the final result is worth the effort.


It is a common misconception that turning the sharpness on a TV to its maximum will provide a sharper picture. Truth be told, high-definition images usually need little or no sharpness enhancement. You can play around with this setting by pausing your source on a scene that provides lots of straight lines; for instance, a scene with lots of buildings or other uniform shapes like stadium bleachers. If you turn the sharpness to its maximum, you should notice that the straight lines will become jagged. This is the TV introducing artifacts to the image that shouldn’t be there. Reduce the sharpness to a point where the edges appear clean and straight, then let it be.


Many of the high-end TVs we’ve tested have outstanding color accuracy right out of the box. But, on mid to lower-tier TV’s, color adjustment could be considered the trickiest of them all. Without a calibration disc and an optical filter (or the ability to defeat the red and green output of the television) it can be tough to know if you’ve got the color just right. Just how green should a leaf look, anyway? For this reason, a calibration disc is highly recommended to achieve the most accurate color settings. We do have a couple of tricks to offer, though.

We strongly recommend you take notes of each setting and store it for future reference.

First, find out if your TV offers a color-temperature adjustment. Settings for color temperature are usually expressed in terms of cool or warm. Choose the warmest setting you have available to you as a starting point. From there, find a scene with plenty of faces in it, then press pause. Turn the color all the way up and notice how it appears everyone has jaundice or a fresh sunburn. You don’t want that. Now, turn the color nearly all the way down and notice how everyone looks as if they belong in the morgue. You don’t want that either. Now adjust the color back up until faces look natural. You want peachy, not rosy. Each person’s face should have its own distinct hue. If it looks like real skin tone, you’ll know you’ve gotten close.


We recommend that you leave the Tint setting alone, unless you are using a calibrator disc. It is a rare case in which the tint setting will need any adjustment, but it does happen.

Wrapping up your work

Now that you have made your adjustments, we strongly recommend you take notes of each setting and store it for future reference. Someone is bound to come along and accidentally screw it up at some point. Also, not all TVs will allow you to copy the work you did for one input (HDMI 1, for instance) to other inputs. Having a hard copy of your settings will allow you set things quickly for your other inputs.

If going through this process has you wondering how much more could be done to refine the picture, then it may be worth the small investment in a calibration disc. The test patterns contained within these discs will make the process less subjective, and you will complete your calibration with a heightened sense of assurance that your TV is set the way it should be.

Finally, it is time to enjoy the fruits of your labor. We find a cold, refreshing beverage often enhances the satisfaction of a job well done, so grab one, have a seat and enjoy your shiny new TV with the knowledge that it looks its best, and you made it happen.