Integra DTR-9.9 Review

Specifications

Rated Output Power (FTC)
145 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC)
175 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)
185 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0.1% (FTC)

Maximum Output Power (JEITA)
7 ch x 280 W at 6 ohms, 1 kHz, 1 ch driven

Dynamic Power
400 W (3 ohm, Front)
300 W (4 ohm, Front)
180 W (8 ohm, Front)

THD (Total Harmonic Distortion)
0.05% (Power Rated)

Damping Factor
60 (Front, 1 kHz, 8ohm)

Input Sensitivity and Impedance
200 mV/ 47 kohm (LINE)
2.5 mV/47 kohm (PHONO MM)

Output Level and Impedance
200 mV/ 470 ohm (REC OUT)

Phono Overload
70 mV (MM 1 kHz, 0.5%)

Frequency Response
5 Hz–100 kHz/ +1 dB-3 dB (Direct mode)

Tone Control
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio
110 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)

Speaker Impedance
4ohm–16ohm