Skip to main content
  1. Home
  2. Emerging Tech
  3. News

The first 3D-printed revolver fires 8 shots, just add a roofing nail and elastic

Kelly Hodgkins
By

Mechanical engineering student James Patrick is bound to turn some heads with his PM522 Washbear, a 3D-printed pepperbox revolver capable of firing up to 8 bullets between reloads. Except for an elastic band spring, a metal firing pin, and steel rods as detectable metal, the gun is entirely 3D-printed using ABS plastic or a durable nylon material. According to Patrick, it is the world’s first functional 3D-printed repeating firearm that has been printed using a consumer 3D printer.

Patrick has been working on his gun for months and it shows in the design, which is brilliantly simple. Unlike Cody Wilson’s single-fire Liberator gun, Patrick’s Washbear is a revolver that makes good on its name, allowing the user to take multiple shots without reloading. Patrick uses a 6- or 8-chamber pepperbox-style cylinder that is removable. The cylinder is held in place by a simple pin at the front that can be easily removed, permitting the user to swap out a 6-round cylinder and replace it with an 8-round without modifying the gun.

World's First 3D Printed Revolver!

Once the cylinder is loaded and in place, Patrick uses elastic bands attached to a trigger to turn the cylinder and line up the round for firing. As the user pulls backs on the trigger, the cylinder moves into place and the striker is pulled back with the trigger. The striker is equipped with a flat roofing nail as the firing pin. When the trigger is pulled back to its furthest position, it drops down slightly into the handle, allowing the striker to move forward and hit the round with the firing pin. As the trigger moves back to its resting state, the cylinder is moved off-center, a safety measure that prevents the accidental firing of the gun in case it is dropped or jostled.

Recommended Videos

In an attempt to comply with gun regulations, Patrick has added adequate detectable metal to the plastic gun using steel rods that are epoxied into the well of the grip. It remains to be seen whether this inclusion of detectable metal will be enough render the gun legal or whether the authorities will seek to have the blueprints for the gun removed from the Internet as it did with Wilson’s Liberator gun when it debuted in 2013. As of the publishing of this post, you can still download the STL files for the Washbear from Patrick’s website and read his five-part series that covers the design and assembly of the gun.

Editors' Recommendations

Topics
Kelly Hodgkins
Kelly Hodgkins
Contributor
Kelly's been writing online for ten years, working at Gizmodo, TUAW, and BGR among others. Living near the White Mountains of…
This startup says it will be 3D-printing entire houses within a year
mighty buildings 3d print house 5

Is 3D printing the future of housebuilding? It certainly will be if new startup Mighty Buildings, which launched from stealth mode this week, has its way. The company builds houses rapidly using a giant 3D printer and proprietary 3D printing material that, unlike concrete, hardens almost immediately thanks to a UV light curing process. This technique allows it to create houses with 95% fewer labor hours and significantly less waste than traditional construction techniques, which could be a game-changer in the construction field.

“The 3D printing, robotic post-processing, and the ability to automate steps like the pouring of insulation means that Mighty Buildings will be able to automate up to 80% of the construction process,” Sam Ruben, chief sustainability officer and co-founder of the company, told Digital Trends.

Read more
Europe’s biggest 3D printer helps create an entire two-story house
kamp c 3d printed building cobod printing

While 3D printing might be most commonly used to print smaller-sized models or prototypes, that doesn't mean it can’t also be used to print larger objects. Much, much larger. In Belgium, Europe’s largest 3D printer was recently used to print an entire house. Unlike other 3D-printed houses we’ve covered (of which there are a handful), this one has two floors -- making it one of the biggest and most ambitious 3D-printed housing projects we’ve seen.

“[We used a] gantry printer delivered by COBOD [based in Denmark],” Emiel Ascione, project manager at Kamp C, the firm behind the project, told Digital Trends. “It was their prototype BOD2 [printer]. A gantry printer operates basically like the most common small plastic printers and uses the same type of software, [but on a much larger scale]. The concrete, the silo, as well as the mixing and pumping installation. were delivered by our partner Weber.”

Read more
Inside the quest to 3D print a perfectly palatable steak
3D printed steak

As people grow more concerned about the impacts of the meat industry both on the environment and the animals involved, fake meats have experienced a boom in popularity. Products like Beyond Burger and Impossible Pork, for example, have captured the attention of vegans and vegetarians across the globe for their astonishingly meat-like tastes and textures. But while ground meat substitutes have made big strides in recent years, plant based versions of more choice cuts aren’t yet on the menu. Whole cuts of meat are the next milestone for the fake meat business, and companies around the world are sprinting to replicate the most iconic cut of all: Steak.

And they’re doing it through 3D printing.
Steak: Nature’s meaty masterpiece
Even the tastiest ground beef arrives in your kitchen as a mass of reddish flesh pressed into plastic or wax paper. Next to that, a good steak is a Michelangelo fresco, with layers of muscle fiber and fat.

Read more