Design
2-channel smart amp power amplifier with factory installed BBE sound enhncement module. High current amp topology can operate at 2.66 ohms.
Feature
Bridge/mono switch, line level ouputs for daisy chaining multiple amplifiers, tamper resistant, recessed power swtich, recessed input level and auto-on sensitivity controls, ground lift switch, defeatable auto-on signal sensing, signal preset LEDs, protect/clipping LEDs, BBE status LEDs, auto-on dip switches for auto turn-on delay, In-rush current limiting circuitry
High-Pass Filter Characteristics
Defeatable high pass filter jumpers on Sonance BBE SAT module, (-3dB at 27Hz) protect in-wall volume controls
BBE Control
Control voltage can trigger BBE effect on/off and change effect amount
Protection Circuitry
Active current limit, short circuit and speaker protection, auto-resetting thermal protection shut-off
Power Output
Both CHannels Driven
75W RMS per channel @ 8 ohms, 125W RMS per channel @ 4 ohms, 135W per channel @ 2.7 ohms
Power Output (Bridged)
(20Hz - 20kHz): 250 watts RMS @ 8 ohms, (1kHz): 270 watts RMS @ 8 ohms
Total Harmonic Distortion
<0.05% (20Hz-20kHz @ 8 ohms), <0.08% (20Hz-20kHz @ 4 ohms), <0.15% (20Hz-20kHz @ 2.7 ohms)
Signal-To-Noise Ratio
105dB below rated output ("A" weighted)
Input Sensitivity
700mv for 75 watts @ 8 ohms
BBE Settings
+9dB, +6dB, OFF
Power Consumption
675 watts @ 4 ohms (full power)
Heat Output
1330 BTU/HR (full power)
Available Options
Rackmount and 230V versions
Dimensions WxHxD
16 3/4" x 3 7/8" x 15 1/4" (425mm x 98mm x 387mm)
RMF Dimensions WxHXD
19" x 3 1/2" x 15 1/4" (483mm x 89mm x 387mm)
Rack Space Requirement
2U
Shipping Weight
24lbs (10.9 kg)
competitors
Write a User Review
