Home > Product Reviews > Home Theater > LG 47LM6200

LG 47LM6200

We haven't had a chance to fully test this product yet, but we've assembled this helpful overview of relevant information on it.

The LG 47LM6200 is the mid-level model of LG’s LM6200 series of LED-LCD TVs. This particular model has a 47″ screen complete with LED Plus with local dimming which allows the screen to dim independent sections of the screen depending on how much light is hitting it. It also comes with LG Cinema 3D and LG Smart TV which together provide some of the best downloadable content for your television all at the touch of your smart remote. The 3D allows the user to toggle from 3D to 2D very easily and also allows the user to adjust the amount at which images appear to pop out of the screen. The 47LM6200 also comes with a 1920 x 1080 native resolution, full 1080p and also has a 120Hz Trumotion refresh rate. This series also has four HDMI ports and three USB ports. The LG 47LM6200 is available now and is priced at $1,499.99 on LG’s website.

Features List:

– 47″ Screen

– 1920 x 1080 Native Resolution 

– 120Hz Trumotion Refresh

– LG Cinema 3D

– LG Smart TV

– LED Plus with Local Dimming

– 4 HDMI/3 USB

Digital Trends’ TV Buying Tips:

Do I need an ATSC tuner?

If you plan on watching, free, over-the-air programming, then yes. As of 2009, all over-the-air broadcasts use the ATSC standard. Pretty much all HDTVs manufactured over the past few years will include this feature.

Which other panel specs should I pay attention to?

In short: brightness, contrast, and refresh time.

Brightness is measured in Candelas per square meter, or cd/m2. A typical figure, for instance, might be 500 cd/m2. More is always better, especially if you plan to plant your TV in a bright room where the screen will have to overcome other light sources.

Contrast is measured as a ratio of the brightest white a TV can produce, over the darkest dark. For instance, Insignia’s NS-L42X-10A offers a 4,000:1 contrast ratio. More is also better, but beware of “dynamic contrast ratios,” which use unrealistic measurement conditions (the brightest white is measured with the backlight set to full, and the darkest dark with the backlight to minimum, even though those levels could never occur side by side on the same screen) to inflate the number to levels like 2,000,000:1.

Refresh time is measured in milliseconds, such as 5ms. Lower is always better, and will prevent the “ghosting” that can sometimes be seen in fast-motion video.

How large of a screen do I really need?

“Bigger is better” doesn’t make any more sense when choosing an HDTV for your living room than when choosing a couch for your living room. A lot of factors come into play. As a general rule, consider a TV 1.5 to 3.0 times the screen size. For instance, a 32-inch television might make sense for viewing distances as close as four feet away, and as far as eight feet away. Check out our guide to choosing the right size HDTV for more details, including a helpful chart.

LCD or Plasma?

Debating between LCD or plasma can almost get as subjective as debating between chocolate and vanilla. But unlike the never-ending ice cream debate, there actually is a superior TV choice, depending on how you plan to use it.

Check out some of our previous guides on the subject to get a better look, but in short, plasmas use more electricity, come in bigger sizes, have deeper blacks, don’t suffer from motion blur, and offer an unlimited viewing angle that’s best for off-axis viewing. LCDs are more energy-efficient, have fewer problems with glare due to their matte screens, can hold an image for hours or days without suffering “burn-in,” and generally look brighter.

After deciding which format to go with, our LCD and Plasma HDTV buying guides can help you with more questions specific to your type of TV.

Do I need a 120Hz set? What about 240Hz?

This popular LCD TV-based technology helps reduce motion blur. Pronounced “120 hertz,” 120Hz technology essentially doubles the speed at which frames are displayed, from 60 frames per second to 120 frames per second, resulting in a clearer moving image, especially in fast-action video sequences.

Since the screen can display more frames than a movie actually has, many TVs will artificially generate in-between frames where they don’t exist to make motion look smoother. Some people find the look more fluid, while some people think it looks artificial and odd. Fortunately, all TVs that offer it also offer an option to turn it off, if you don’t like it. We recommend testing it in person to see the effects for yourself before deciding whether or not you should pay extra.

Check out our article 120Hz and 240Hz Refresh Rates Explained for more on motion smoothing.

Get our Top Stories delivered to your inbox: