Mitsubishi WD-60C10

We haven't had a chance to fully test this product yet, but we've assembled this helpful overview of relevant information on it.

Watch jaw-dropping action leap off the screen with the Mitsubishi WD-60C10, a 60-inch 3D ready LED television with rear projection technology.

Bring your entertainment to life in immersive 3D with the Mitsubishi WD-60C10, a 60-inch LED television. The picture is top quality 1080p HDTV with a 1920 x 1080 resolution. Complete the cinematic experience in your living room with a widescreen aspect ratio of 16:9. Three HDMI ports allow for plenty of home entertainment consoles to be plugged in to the television, so there’s no shortage of games to play, shows and movies to watch with this product.

Features List:

-60 inch LED screen

-1080p HDTV

-3D ready

-1920 x 1080 resolution

-refresh rate 120 Hz

-aspect ratio 16:9

-3 HDMI ports

Digital Trend’s TV Buying Tips:

Do I need a 120Hz set? What about 240Hz?

This popular LCD TV-based technology helps reduce motion blur. Pronounced “120 hertz,” 120Hz technology essentially doubles the speed at which frames are displayed, from 60 frames per second to 120 frames per second, resulting in a clearer moving image, especially in fast-action video sequences.

Since the screen can display more frames than a movie actually has, many TVs will artificially generate in-between frames where they don’t exist to make motion look smoother. Some people find the look more fluid, while some people think it looks artificial and odd. Fortunately, all TVs that offer it also offer an option to turn it off, if you don’t like it. We recommend testing it in person to see the effects for yourself before deciding whether or not you should pay extra.

Check out our article 120Hz and 240Hz Refresh Rates Explained for more on motion smoothing.

Should I worry about viewing angle?

Absolutely. All LCDs will distort when viewed from extreme angles, but the degree of distortion and the angle it starts to occur at varies from TV to TV. If you plan to pack a dozen people in front of a single TV for entertaining, viewing angle will make a huge difference for the unlucky few who get scattered off to the sides. Most manufacturers will state viewing angle in degrees (for instance, 160) in the specifications for a TV, but be warned: methods for measuring this very subjective figure vary, and we can guarantee most companies opt for the most generous figures. When possible, try to evaluate it yourself in person, or read hands-on reviews that can offer anecdotal evidence, rather than relying on easily-manipulated numbers.

Which other panel specs should I pay attention to?

In short: brightness, contrast, and refresh time.

Brightness is measured in Candelas per square meter, or cd/m2. A typical figure, for instance, might be 500 cd/m2. More is always better, especially if you plan to plant your TV in a bright room where the screen will have to overcome other light sources.

Contrast is measured as a ratio of the brightest white a TV can produce, over the darkest dark. For instance, Insignia’s NS-L42X-10A offers a 4,000:1 contrast ratio. More is also better, but beware of “dynamic contrast ratios,” which use unrealistic measurement conditions (the brightest white is measured with the backlight set to full, and the darkest dark with the backlight to minimum, even though those levels could never occur side by side on the same screen) to inflate the number to levels like 2,000,000:1.

Refresh time is measured in milliseconds, such as 5ms. Lower is always better, and will prevent the “ghosting” that can sometimes be seen in fast-motion video.

What resolution do I need?

All consumer HDTVs break down into either 720p or 1080p resolution, which represents the number of horizontal lines in the display. More is obviously better here, but at small screen sizes – like 32 inches – many people find it hard to distinguish the benefit of 1080p resolution. As our guide to screen size points out, viewing distance can also play a factor: The closer you sit, the more you’ll appreciate higher resolution. In general, many people start to see an obvious difference between 1080p and 720p as screens sized 40 inches and up.

Also take into account that much of the content available today doesn’t take advantage of full 1080p resolution. Many shows still broadcast in 720p or 1080i. Technically only Blu-ray discs and digital, non-video sources (like a PlayStation 3, Xbox 360, or PC hooked up to the TV), really offer true 1080p content. This makes 1080p a no-brainer if you want to play Mass Effect 2 with the most detail and watch Star Trek on Blu-ray, but less essential if you just play to watch standard over-the-air broadcast material.

How large of a screen do I really need?

“Bigger is better” doesn’t make any more sense when choosing an HDTV for your living room than when choosing a couch for your living room. A lot of factors come into play. As a general rule, consider a TV 1.5 to 3.0 times the screen size. For instance, a 32-inch television might make sense for viewing distances as close as four feet away, and as far as eight feet away. Check out our guide to choosing the right size HDTV for more details, including a helpful chart.