We haven't had a chance to fully test this product yet, but we've assembled this helpful overview of relevant information on it.
It’s another Samsung stylish Plasma TV with their Touch of Color gradients and super slim (1.4 inches) that will look good in a living room. This 50 inch screen has 1080p resolution, 5,000,000:1 dynamic contrast ratio, and a 600Hz subfield motion refresh rate. Two 15 watt speakers are built in to the bottom of the set and 4 HDMI ports with peripheral inputs. It comes internet ready with an ethernet port or you can get Samsung’s LinkStick to make it Wifi ready. Samsung provides their Smart TV program which allows users to get apps that let you access Youtube, Netflix, ESPN, and others. It also comes with a V-Chip for parental controls and exceeds Energy Star standards.
- 50 inch Plasma Screen
- 1080p resolution
- 5,000,000:1 ratio
- 600Hz subfield motion refresh rate
- Two 15 watt speakers
- 4 HDMI ports, 1 ethernet port
- Samsung’s Smart TV with apps
- V-Chip for Parental Control
- Exceeds Energy Star standards
Which other panel specs should I pay attention to?
In short: brightness, contrast, and refresh time.
Brightness is measured in Candelas per square meter, or cd/m2. A typical figure, for instance, might be 500 cd/m2. More is always better, especially if you plan to plant your TV in a bright room where the screen will have to overcome other light sources.
Contrast is measured as a ratio of the brightest white a TV can produce, over the darkest dark. For instance, Insignia’s NS-L42X-10A offers a 4,000:1 contrast ratio. More is also better, but beware of “dynamic contrast ratios,” which use unrealistic measurement conditions (the brightest white is measured with the backlight set to full, and the darkest dark with the backlight to minimum, even though those levels could never occur side by side on the same screen) to inflate the number to levels like 2,000,000:1.
Refresh time is measured in milliseconds, such as 5ms. Lower is always better, and will prevent the “ghosting” that can sometimes be seen in fast-motion video.
What is a LED backlighting?
Traditionally, LCD TVs have used compact fluorescent (CFL) tubes placed behind an LCD panel to provide the backlighting that literally lights up the screen. More modern LED TVs replace these tubes with clusters of light emitting diodes – LEDs.
When LEDs are placed at the edges of the screen, as CFL tubes traditionally were, TVs can be made significantly thinner, and LEDs use less power than fluorescents. The most inexpensive LED-lit HDTVs take this approach.
However, the biggest advantage to using LEDs is realized when they light the screen in a grid from behind. Sophisticated electronics vary the intensity of every LED in accordance with action on the screen, making dark areas of the image darker, and bright areas brighter. This effectively increases the contrast ratio compared to uniform lighting. Although it also increases costs, many people believe this type of LCD is the first to truly rival plasma on black levels.
Read more about LED backlighting and the differences between both techniques in our guide to understanding LED backlighting.
What resolution do I need?
All consumer HDTVs break down into either 720p or 1080p resolution, which represents the number of horizontal lines in the display. More is obviously better here, but at small screen sizes – like 32 inches – many people find it hard to distinguish the benefit of 1080p resolution. As our guide to screen size points out, viewing distance can also play a factor: The closer you sit, the more you’ll appreciate higher resolution. In general, many people start to see an obvious difference between 1080p and 720p as screens sized 40 inches and up.
Also take into account that much of the content available today doesn’t take advantage of full 1080p resolution. Many shows still broadcast in 720p or 1080i. Technically only Blu-ray discs and digital, non-video sources (like a PlayStation 3, Xbox 360, or PC hooked up to the TV), really offer true 1080p content. This makes 1080p a no-brainer if you want to play Mass Effect 2 with the most detail and watch Star Trek on Blu-ray, but less essential if you just play to watch standard over-the-air broadcast material.
LCD or Plasma?
Debating between LCD or plasma can almost get as subjective as debating between chocolate and vanilla. But unlike the never-ending ice cream debate, there actually is a superior TV choice, depending on how you plan to use it.
Check out some of our previous guides on the subject to get a better look, but in short, plasmas use more electricity, come in bigger sizes, have deeper blacks, don’t suffer from motion blur, and offer an unlimited viewing angle that’s best for off-axis viewing. LCDs are more energy-efficient, have fewer problems with glare due to their matte screens, can hold an image for hours or days without suffering “burn-in,” and generally look brighter.
Should I worry about viewing angle?
Absolutely. All LCDs will distort when viewed from extreme angles, but the degree of distortion and the angle it starts to occur at varies from TV to TV. If you plan to pack a dozen people in front of a single TV for entertaining, viewing angle will make a huge difference for the unlucky few who get scattered off to the sides. Most manufacturers will state viewing angle in degrees (for instance, 160) in the specifications for a TV, but be warned: methods for measuring this very subjective figure vary, and we can guarantee most companies opt for the most generous figures. When possible, try to evaluate it yourself in person, or read hands-on reviews that can offer anecdotal evidence, rather than relying on easily-manipulated numbers.