Samsung UN46C5000

We haven't had a chance to fully test this product yet, but we've assembled this helpful overview of relevant information on it.

The Samsung UN46C5000 is a 46-inch LCD television is 3D ready and perfect for those looking for an immersive home entertainment experience. That experience will be added to by the dolby digital sound system. The newly designed remote control has a touch screen, allowing for easier use of the TV’s features, and also displays broadcast television while Blu-rays play on the big screen. This television is HD-ready with 1080p resolution and comes equipped with four HDMI ports.

Features List:

-46  inch LCD screen

-1080p HDTV

-3D compatible

-resolution 1920 x 1080

-Aspect ratio 16:9

-Dynamic contrast ratio 3000000:1

-4 HDMI ports

-Closed caption

-picture in picture

Digital Trend’s TV Buying Tips:

Do I need a 120Hz set? What about 240Hz?

This popular LCD TV-based technology helps reduce motion blur. Pronounced “120 hertz,” 120Hz technology essentially doubles the speed at which frames are displayed, from 60 frames per second to 120 frames per second, resulting in a clearer moving image, especially in fast-action video sequences.

Since the screen can display more frames than a movie actually has, many TVs will artificially generate in-between frames where they don’t exist to make motion look smoother. Some people find the look more fluid, while some people think it looks artificial and odd. Fortunately, all TVs that offer it also offer an option to turn it off, if you don’t like it. We recommend testing it in person to see the effects for yourself before deciding whether or not you should pay extra.

Check out our article 120Hz and 240Hz Refresh Rates Explained for more on motion smoothing.

Which other panel specs should I pay attention to?

In short: brightness, contrast, and refresh time.

Brightness is measured in Candelas per square meter, or cd/m2. A typical figure, for instance, might be 500 cd/m2. More is always better, especially if you plan to plant your TV in a bright room where the screen will have to overcome other light sources.

Contrast is measured as a ratio of the brightest white a TV can produce, over the darkest dark. For instance, Insignia’s NS-L42X-10A offers a 4,000:1 contrast ratio. More is also better, but beware of “dynamic contrast ratios,” which use unrealistic measurement conditions (the brightest white is measured with the backlight set to full, and the darkest dark with the backlight to minimum, even though those levels could never occur side by side on the same screen) to inflate the number to levels like 2,000,000:1.

Refresh time is measured in milliseconds, such as 5ms. Lower is always better, and will prevent the “ghosting” that can sometimes be seen in fast-motion video.

What resolution do I need?

All consumer HDTVs break down into either 720p or 1080p resolution, which represents the number of horizontal lines in the display. More is obviously better here, but at small screen sizes – like 32 inches – many people find it hard to distinguish the benefit of 1080p resolution. As our guide to screen size points out, viewing distance can also play a factor: The closer you sit, the more you’ll appreciate higher resolution. In general, many people start to see an obvious difference between 1080p and 720p as screens sized 40 inches and up.

Also take into account that much of the content available today doesn’t take advantage of full 1080p resolution. Many shows still broadcast in 720p or 1080i. Technically only Blu-ray discs and digital, non-video sources (like a PlayStation 3, Xbox 360, or PC hooked up to the TV), really offer true 1080p content. This makes 1080p a no-brainer if you want to play Mass Effect 2 with the most detail and watch Star Trek on Blu-ray, but less essential if you just play to watch standard over-the-air broadcast material.

What is a LED backlighting?

Traditionally, LCD TVs have used compact fluorescent (CFL) tubes placed behind an LCD panel to provide the backlighting that literally lights up the screen. More modern LED TVs replace these tubes with clusters of light emitting diodes – LEDs.

When LEDs are placed at the edges of the screen, as CFL tubes traditionally were, TVs can be made significantly thinner, and LEDs use less power than fluorescents. The most inexpensive LED-lit HDTVs take this approach.

However, the biggest advantage to using LEDs is realized when they light the screen in a grid from behind. Sophisticated electronics vary the intensity of every LED in accordance with action on the screen, making dark areas of the image darker, and bright areas brighter. This effectively increases the contrast ratio compared to uniform lighting. Although it also increases costs, many people believe this type of LCD is the first to truly rival plasma on black levels.

Read more about LED backlighting and the differences between both techniques in our guide to understanding LED backlighting.

Get our Top Stories delivered to your inbox: