We haven't had a chance to fully test this product yet, but we've assembled this helpful overview of relevant information on it.
The Vizio R3D470VS is part of Vizio’s new line of R3D0VS series of LED-LCD TVs. This line of televisions was actually announced at CES in 2011, but due to some error with Google they were unable to release. They were back again this year however, and have announced that their “Google TVs” will be ready to ship come fall. The reason that these TVs are so unique is that they have the Google interface built into their TVs and allow for changing quickly between both Android phones and tablets. This series of televisions also comes with a 240Hz refresh rate, passive 3D and edge-lit LED backlighting. Again, the Vizio R3D470VS will be available in the early to late fall so be on the look out for it.
– 47″ Screen
– Google TV
– Passive 3D
– 240Hz Refresh Rate
– Edge-lit LED Backlighting
Digital Trends’ TV Buying Tips:
What resolution do I need?
All consumer HDTVs break down into either 720p or 1080p resolution, which represents the number of horizontal lines in the display. More is obviously better here, but at small screen sizes – like 32 inches – many people find it hard to distinguish the benefit of 1080p resolution. As our guide to screen size points out, viewing distance can also play a factor: The closer you sit, the more you’ll appreciate higher resolution. In general, many people start to see an obvious difference between 1080p and 720p as screens sized 40 inches and up.
Also take into account that much of the content available today doesn’t take advantage of full 1080p resolution. Many shows still broadcast in 720p or 1080i. Technically only Blu-ray discs and digital, non-video sources (like a PlayStation 3, Xbox 360, or PC hooked up to the TV), really offer true 1080p content. This makes 1080p a no-brainer if you want to play Mass Effect 2 with the most detail and watch Star Trek on Blu-ray, but less essential if you just play to watch standard over-the-air broadcast material.
Which other panel specs should I pay attention to?
In short: brightness, contrast, and refresh time.
Brightness is measured in Candelas per square meter, or cd/m2. A typical figure, for instance, might be 500 cd/m2. More is always better, especially if you plan to plant your TV in a bright room where the screen will have to overcome other light sources.
Contrast is measured as a ratio of the brightest white a TV can produce, over the darkest dark. For instance, Insignia’s NS-L42X-10A offers a 4,000:1 contrast ratio. More is also better, but beware of “dynamic contrast ratios,” which use unrealistic measurement conditions (the brightest white is measured with the backlight set to full, and the darkest dark with the backlight to minimum, even though those levels could never occur side by side on the same screen) to inflate the number to levels like 2,000,000:1.
Refresh time is measured in milliseconds, such as 5ms. Lower is always better, and will prevent the “ghosting” that can sometimes be seen in fast-motion video.
What are widgets?
Many of the top television manufacturers – including Sony, Sharp, Panasonic and Samsung – include Ethernet jacks on the back of their premium televisions for high-speed Internet connectivity (or in some cases, have integrated Wi-Fi for wireless connections). TV viewers will then use the remote to select “widgets,” graphicalicons on the screen that plays relevant (and customized) content ranging from YouTube videos and Flickr photo galleries to local weather, news, sports updates and stock quotes, usually delivered by Really Simple Syndication (RSS). Even more exciting is the partnership between Netflix and various TV companies, such as LG and Sony, allowingtelevision viewers to access tens of thousands of movies on-demand, many of which are in high-definition.
What is a LED backlighting?
Traditionally, LCD TVs have used compact fluorescent (CFL) tubes placed behind an LCD panel to provide the backlighting that literally lights up the screen. More modern LED TVs replace these tubes with clusters of light emitting diodes – LEDs.
When LEDs are placed at the edges of the screen, as CFL tubes traditionally were, TVs can be made significantly thinner, and LEDs use less power than fluorescents. The most inexpensive LED-lit HDTVs take this approach.
However, the biggest advantage to using LEDs is realized when they light the screen in a grid from behind. Sophisticated electronics vary the intensity of every LED in accordance with action on the screen, making dark areas of the image darker, and bright areas brighter. This effectively increases the contrast ratio compared to uniform lighting. Although it also increases costs, many people believe this type of LCD is the first to truly rival plasma on black levels.
Read more about LED backlighting and the differences between both techniques in our guide to understanding LED backlighting.