Skip to main content

How to fix the critical software update problem on Macs

Mac users have recently begun to run into an issue that prevents them from using MacOS effectively: When they try to turn their Macs on, they get a message that says, “A critical software update is required for your Mac, but an error was encountered while installing this update,” with an additional note that warns, “Your Mac can’t be used until this update is installed.”

Often, this traps users in a loop of trying to install this “critical software update” that never seems to work, essentially locking down the Mac (not the first time Macs have encountered issues). This is a serious problem, and when it occurs you’re probably looking for a solution as soon as possible. Here are several potential causes behind this malfunction and the fixes that can help you get back to normal.

Your Touch Bar update isn’t working

cheap macbook deals
Digital Trends

This problem is often traced back to MacBooks that have the Touch Bar. The Touch Bar acts much like a built-in accessory, and has specific firmware dedicated to its operation. This can cause problems when it’s time to update MacOS, and a separate update needs to be included for the Touch Bar. Sometimes this Touch Bar update is especially sensitive to internet connections or doesn’t respond well to other factors in the update process.

Fortunately, there’s a relatively easy way to see if this is the problem and fix it. First, shut down your MacBook. If you have to, hold down the power button to force a shutdown in case nothing else responds.

Now connect your laptop to a wired network – don’t use Wi-Fi. You want a directly connected network connection, ideally without any restrictions to access. Now boot up your MacBook again and tell it to restart and try to update the software again. If the reboot takes a while, that’s okay. Let it work out any kinks, and see if it can now load MacOS successfully. This is often just the special treatment that the Touch Bar update needs.

A recent app is causing big problems

Image used with permission by copyright holder

Kernel panic and update issues can be caused by a recently downloaded app that is working very poorly with MacOS. If you can access MacOS, even for a few minutes, then you can try deleting recently installed apps and see if this fixes the problem.

Sometimes apps can interact with Apple updates and access to Apple servers in weird ways, especially security and network control apps. Hands Off!, for example, has been linked to this critical software update problems. If you recently tried using this app or any similar apps, go in and uninstall them entirely: They just aren’t compatible with the current Apple update process.

You need to reinstall MacOS

MacOS Reinstall
Image used with permission by copyright holder

Sometimes the update problem points to a more serious flaw in MacOS. The best way to deal with this is to reinstall MacOS entirely. Don’t worry! You don’t have to erase your disk to do this, which means you should be able to keep almost all your saved data (which is unlikely to have caused this particular problem).

When turning your Mac on, simple hold down the “Command” and “R” keys to get started. This will launch the MacOS Utilities window. From here, choose “Reinstall MacOS.” When prompted, choose “Continue” and follow the instructions to complete the reinstallation. This will, of course, take some time, so only start the process when your Mac is connected to a power supply and you have plenty of time when you don’t need to use that computer.

It’s time to take your computer to an Apple Store

Scott Olson/ Getty

If none of these potential solutions are working, it’s time to call up a local Apple Store and arrange to take your Mac in for a closer look from the professionals. Remember, this is a serious issue and the problem could be an internal flaw that you’re just not equipped to deal with. The Apple Store will be able to find out what’s wrong or advise you on how to proceed (such as a full wipe of your computer).

Because a problem like this can lie in the details, it’s often necessary to have an expert take a look and diagnose what’s going on. Make sure you check your schedule and make sure that it’s all right to have your Mac in the shop for a few days or longer!

Editors' Recommendations

Tyler Lacoma
Former Digital Trends Contributor
If it can be streamed, voice-activated, made better with an app, or beaten by mashing buttons, Tyler's into it. When he's not…
Apple just announced the dates for WWDC 2024
WWDC 2024 banner.

Apple has just announced the dates for its Worldwide Developers Conference (WWDC) 2024. WWDC will take place from June 10 through June 14, 2024. A special event will be held at Apple Park in Cupertino, California, on June 10, and we expect to see the reveal of iOS 18, iPadOS 18, watchOS 11, tvOS 18, macOS 15, and visionOS 2.

WWDC will be free for all developers online. Developers will be able to access a variety of online sessions and labs that will showcase the latest advancements in software across all of Apple’s hardware.

Read more
Wi-Fi not working? How to fix the most common problems
the fbi wants you to reboot your router insecure getty

Wi-Fi problems can strike anyone at any time, no matter how much networking experience you may have. But if you've not come across a particular Wi-Fi issue before, there's no need to worry if you don't know how to fix it. All you need are the right tools and a few tips, and you'll be able to solve your Wi-Fi problem in no time.

Whether you're experiencing problems with slow internet, Wi-Fi signal dropping, or you just can't connect to Wi-Fi at all, here are some of the quickest and easiest fixes you can try. We'll also cover some advanced advice on more troubling issues that would definitely result in your Wi-Fi not working at all, or at slower speeds.
Basic Wi-Fi troubleshooting checklist
If you have a non-specific problem with your Wi-Fi or don't consider the problem serious enough to investigate more in-depth problems, consider the items on this list as a great way to start fixing your problem.

Read more
Apple quietly backtracks on the MacBook Air’s biggest issue
The MacBook Air on a white table.

The new MacBook Air with M3 chip not only allows you to use it with two external displays, but it has also reportedly addressed a storage problem that plagued the previous M2 model. The laptop now finally has much faster storage performance since Apple has switched back to using two 128GB NAND modules instead of a single 256GB module on the SSD drive.

This was discovered by the YouTuber Max Tech, who tore down the entry-level model of the MacBook Air M3 with 8GB of RAM and 256GB of storage. In his tests, thanks to the two NAND modules, the M3 MacBook Air is nearly double faster than the M2 MacBook Air. Blackmagic Disk Speed tests show that the older M2 model with the problematic NAND chip had a 1584.3 Mb/s write speed, and the newer M3 model had 2108.9 Mb/s for the M3 model, for a 33% difference. In read speeds, it was 1576.4 Mb/s on the old model and 2880.2 Mb/s on the newer model.

Read more