Skip to main content

Nvidia says melting power connectors are a thing of the past

The graphics card connectors on a power supply. The connectors are burned and melted from where an Nvidia 12VHPWR cable from an RTX 4090 graphics card has been plugged in and overheated.
Shiftyeyes67k on Reddit

Nvidia has expressed confidence that the infamous melting issues with the 12VHPWR power connectors, which plagued some RTX 40-series GPUs, will not recur with its next-generation RTX 50-series lineup.

As reported by QuasarZone, during the Nvidia RTX AI Day 2025 event in South Korea, Nvidia representatives assured attendees that the overheating and melting issues experienced with the RTX 4090’s 12VHPWR connector have been resolved in the RTX 50 series. “We don’t expect that to happen with the RTX 50 series. We made some changes to the connector to respond to the issue at the time, and we know that it is not happening now, about two years later,” said an Nvidia representative.

Recommended Videos

The 12VHPWR connector, also known as the PCIe 5.0 16-pin power connector, first debuted with the RTX 4090 and RTX 4080 GPUs. While it offered compactness and support for high power delivery of up to 600W, it quickly became controversial due to reports of overheating and melting GPUs. Investigations revealed that improper connector seating was a primary cause of these issues. Nvidia and its partners implemented guidelines to ensure proper usage, but user concerns persisted.

Get your weekly teardown of the tech behind PC gaming
Check your inbox!

Eventually, minor tweaks were implemented to introduce the 12V-2×6 connector. The new connector has the same layout and design as the 12VHPWR, but the smaller sensing pins were shortened by 0.1mm, while the conducting terminals extended by 0.15mm. These adjustments are said to enhance the cable’s ability to establish a secure connection, ensuring a safe and reliable power delivery. It is also backwards compatible with 12VHPWR, which mitigates the need for newer cables.

For the upcoming RTX 50-series GPUs, which have increased TGPs of up to 575W for the RTX 5090, Nvidia claims to have taken proactive steps to eliminate these issues. While we take Nvidia’s word on that, we would suggest using modern PSUs compliant with the ATX 3.1 standard, which includes native support for the newer 12V-2×6 connector.

Kunal Khullar
Kunal Khullar is a computing writer at Digital Trends who contributes to various topics, including CPUs, GPUs, monitors, and…
Nvidia’s next-gen GPU plans could be good news for Intel and AMD
Two RTX 4070 Ti Super graphics cards sitting next to each other.

According to a new leak from Benchlife, Nvidia may launch the vast majority of the RTX 50-series in the first quarter of 2025 -- but one GPU is notably missing from the early lineup. That could be very good news for AMD and Intel. While Nvidia will rule the high-end market, the other two brands may get to swoop in with some of the best graphics cards for gamers on a budget and get some breathing room before Nvidia strikes back.

Benchlife reveals that we'll see many of the RTX 50-series staples arrive in the first quarter of the year. The flagship RTX 5090 and the RTX 5080 arriving in January feel like a sure thing at this point, but many leakers also suggest that we'll see other GPUs make their debut during CES 2025.

Read more
Corsair just spilled the beans on next-gen GPU requirements
Nvidia GeForce RTX 4090 is shown along with a hand holding the power cable adapter.

Sometimes, news about next-gen GPUs comes from unlikely sources -- today is one of those days. Corsair just spoke about its power supply units (PSUs) and cooling solutions in relation to the future of some of the upcoming best graphics cards. It turns out that Nvidia's RTX 50-series may not be that much more power-hungry than the current-gen cards, but there's more than just Nvidia to consider here.

Although unexpected, Corsair's statement sounds like good news. The company doesn't talk about any new solutions. In fact, Corsair seems to confirm that the power supply units (PSUs) we use today will still work fine for next-gen cards -- provided the wattage is sufficient.

Read more
Nvidia’s RTX 5090 may not be such a power-hungry beast after all
The RTX 4090 graphics card on a table alongside a set of cables held in hand.

The RTX 5090 will undoubtedly claim its spot atop the rankings of the best graphics cards when it's here, but that kind of power comes with a lot of ... well, power -- or more specifically, a high power draw. To that end, we've heard a lot of speculation about the RTX 5090 potentially decimating your power supply and needing over 600 watts of power. However, Segotep, a China-based PSU manufacturer, weighed in on the matter, and it seems that enthusiasts can hold off on buying a new monstrous PSU for a while yet.

It all started with claims that the RTX 5090 may feature not one, but two 16-pin power connectors. We've already seen some high-end PSUs sporting dual 12V-2x6 power connectors (made by manufacturers such as MSI), which could potentially power a GPU that draws far more than 600 watts.

Read more