Skip to main content
  1. Home
  2. Computing
  3. News

Researchers have found a way to extend Wi-Fi ranges by almost 200 feet

Anita George
By

New research indicates that the signal range of your favorite smart home devices can be boosted, and you might not have to install new hardware to do it either. According to a press release published on Tuesday, October 22, researchers at Brigham Young University have recently developed a new protocol that can boost the Wi-Fi signal range for IoT devices, which in turn may allow such devices to be installed further away from a given Wi-Fi access point. The new protocol is expected to let IoT devices be installed more than 60 meters (or nearly 200 feet) away from an access point, without the addition of new hardware.

Normally, Wi-Fi requires at least one megabit per second (1 Mbps) to maintain a signal. But this newly developed protocol, known as On/Off Noise Power Communication (ONPC), is apparently able to maintain a signal with just one bit per second. And it turns out that one bit per second is just enough to allow many Wi-Fi-enabled devices “that simply need an on/off message” to function. The press release mentioned a few examples of such devices: garage door sensors, sprinkler systems, or air quality monitors.

Photo courtesy of BYU. Image used with permission by copyright holder

The protocol works by letting Wi-Fi-enabled devices transmit wireless noise along with data: “They programmed into the Wi-Fi sensor a series of 1s and 0s, essentially turning the signal on and off in a specific pattern. The Wi-Fi router was able to distinguish this pattern from the surrounding wireless noise (from computers, televisions, and cell phones) and therefore know that the sensor was still transmitting something, even if the data wasn’t being received.”

Recommended Videos

One of the researchers involved, Neal Patwari of Washington University in St. Louis, described how the router interprets the code sent by a Wi-Fi-enabled device using this protocol: “If the access point (router) hears this code, it says, ‘OK, I know the sensor is still alive and trying to reach me, it’s just out of range,’” Patwari said. “It’s basically sending 1 bit of information that says it’s alive.”

Related

When ONPC was tested, the protocol was managed by an application called “Stayin’ Alive” and was able to extend “the range of an off-the-shelf device 67 meters beyond the range of standard Wi-Fi.”

It is worth mentioning, however, that according to the researchers, the ONPC protocol isn’t supposed to replace Wi-Fi or long-range wireless protocols. It is primarily intended to “supplement Wi-Fi.” In fact, when it’s used in tandem with the Stayin’ Alive app, the protocol is only activated when the app “detects that the Wi-Fi device has lost its connection.”

Editors' Recommendations

Topics
Anita George
Anita George
Computing Writer
Anita has been a technology reporter since 2013 and currently writes for the Computing section at Digital Trends. She began…
How to connect Google Nest home speakers to Wi-Fi
The Google Nest Audio.

Google Home (now called Google Nest) smart speakers and displays sit at the core of a smart home. There’s the Google Nest Mini for small spaces and tight budgets, Google Nest Audio for better sound quality and more smarts, and the Google Nest Hub and Google Nest Hub Max that come with screens so you can see information at a glance -- and even watch TV!

Whichever device you choose, the setup is similar, and at its core is a Wi-Fi connection.
How to connect Google Home devices to Wi-Fi

Read more
5 Ways to optimize your home Wi-Fi network for remote school and work
teacher leading a remote classroom

 

Back-to-school season is upon us, and for many households, that unfortunately means a return to remote schooling. Instead of heading out to a classroom in person, many kids will again attend school this year by firing up video calls and submitting assignments online. Ultimately, this means your home Wi-Fi network will soon need to handle more traffic -- especially if you're a parent who's currently working from home. So in order to ensure you don't run into any network congestion issues, we've put together a handful of tips to help you make your home Wi-Fi as stable and reliable as possible in the months ahead. Here's the lowdown:
Get a multiband router
This one might be a no-brainer, but if the router you’re using doesn’t offer multiple frequency bands, then you’re missing out on one of the best parts of modern routers. Whereas most single-band routers operate on the 2.4GHz frequency band, newer dual- and tri-band routers also provide additional networks on the 5GHz frequency band, which has a number of big advantages. Namely, the 5GHz connections can transmit data faster than 2.4GHz ones, which makes them better for households where lots of high-bandwidth activities take place -- like Zoom calls, online gaming, and 4K video streaming.
Place your router strategically
The only downside of a 5GHz connection, however, is that the higher frequency doesn’t travel through walls, furniture, and other obstacles quite as well as a 2.4GHz connection can. This is why router placement is important. Ideally, you should place yours near your most important internet-connected devices, as high off the ground as possible, and in a place that’s free of obstructions. Doing so will ensure that you get the best possible speeds for all your devices -- especially those that have fixed locations and can’t move around to wherever reception is good like phones and laptops can.

Read more
Hex Home gives us a glimpse of how Wi-Fi is used for motion detection
Hex Home Wi-Fi Motion Sensor

I love security cameras that take home privacy seriously, especially those with automatic mechanical shutters that can cover the camera’s lens whether you’re there or not. Even with a sophisticated implementation such as this, some people still don’t trust them enough to watch over their homes. I can’t blame them considering the numerous stories we’ve all heard about cameras being hacked.

That’s why Hex Home should be on your radar. The new DIY home security solutions company caught my attention with its unconventional Wi-Fi sensors that monitor for movement. Think of it as an upgraded version of the traditional motion sensor, but instead of only being able to detect motion in isolated areas, it offers wider coverage for your entire home -- while respecting your privacy at the same time. I was skeptical about its effectiveness, but after a couple of weeks trying it out, I’m convinced it’s practical.
Saying goodbye to Big Brother
One thing you have to remember is that a camera’s vision is limited to its field of view -- so any movement outside of that range goes undetected. With the Hex Home, its main benefit is that it’s capable of detecting motion everywhere -- and it does so without that feeling of someone watching you through a camera.

Read more