Skip to main content

Nvidia’s RTX 5090 isn’t melting power cables, but it sure looks that way

Damaged 12VHPWR cables due to improper seating
PCM

Hong Kong-based tech outlet PCM raised alarms after testing Nvidia’s RTX 5090D and RTX 5080, where it encountered two melted 16-pin power cables and a failed 1,200W power supply unit (PSU). With GPU power demands already a hot topic, fingers were quickly pointed at Nvidia’s newest graphics cards. However, a deeper investigation revealed that an old RTX 4090 Founders Edition (FE) was actually responsible for the meltdown.

Social media posts by PCM, spotted by UNIKO’s Hardware, suggest that its testing likely involved an RTX 4090 Founders Edition (FE) before evaluating the RTX 50-series GPUs. While Nvidia has already updated the RTX 4090 FE’s power connector to the newer and safer 12V-2×6 standard, it’s possible that the unit still had the original, more failure-prone 12VHPWR connector.

Recommended Videos

During testing, both RTX 50 GPUs were pushed to full load when the reviewer noticed system instability, initially suspecting an SSD failure. However, upon closer inspection, they discovered signs of melting on the 16-pin GPU power cable, leading to early speculation that the RTX 50-series might still be vulnerable to power connector issues.

Get your weekly teardown of the tech behind PC gaming
Check your inbox!

pcm adds more detail in the latest fb post:
after extensively testing RTX 5090 D, 5080, 4090, the system have some unstable symptoms and discovered both end of the 12VHPWR cable melted, we check back the pins on the cards and discover a clear burn mark on 4090 FE. 5090 D and 5080…

— UNIKO's Hardware 🌏 (@unikoshardware) February 3, 2025

Further investigation revealed burn marks on the RTX 4090 FE, while the RTX 50 GPUs showed no damage. This strongly suggested that the RTX 4090 FE was responsible for the melted cable, not the newer RTX 50-series cards.

Ever since the introduction of the RTX 4090, several reports have documented 12VHPWR connectors melting due to improper seating. If the connector isn’t fully plugged in, it can generate excessive heat, potentially leading to damage. Nvidia even acknowledged this risk, advising users to ensure a firm and complete connection.

Nvidia’s latest RTX 50-series GPUs actually use a revised 12V-2×6 power connector, designed to prevent power delivery unless properly seated. Recently during the Nvidia RTX AI Day 2025 event in South Korea, company representatives assured that the issues with the connector have been resolved in the RTX 50-series. This upgraded design of the connector is intended to reduce the risk of overheating that plagued the RTX 4090.

To further address concerns, GPU manufacturers are introducing additional safety measures. Zotac has added a safety light feature for its new RTX 50-series GPUs, which gives an indicator if the connector is not fully seated. MSI on the other hand is offering 16-pin cables with visible yellow indicators with its GPUs and PSUs to help users confirm a secure connection.

The bottom line is, if you’ve got an RTX 4090, double-check your power connection as this incident shows improper cabling can still lead to disaster—even long after installation. Thankfully, Nvidia’s RTX 50-series appears to be better protected against such issues.

Kunal Khullar
Kunal Khullar is a computing writer at Digital Trends who contributes to various topics, including CPUs, GPUs, monitors, and…
Nvidia’s RTX 5090 might be up to 70% faster than its predecessor
The RTX 4090 graphics card sitting on a table with a dark green background.

We're nearing the announcement of Nvidia's upcoming RTX 50-series, which will most likely be revealed during CES 2025 in January. Despite the fact that it's less than a month away, we haven't seen any leaked benchmarks of the cards, so their performance remains an enigma. However, a leaker with a lengthy track record now sheds some light on what we can expect from each GPU, and that includes an up to 70% performance boost for Nvidia's best graphics card.

The leaker in question is OneRaichu on X (Twitter), who hasn't shared many new leaks recently, but has had some good insights in the past. As always with any type of leak, treat the following with caution -- it won't be long before we know with certainty what to expect from these upcoming GPUs.

Read more
Corsair just spilled the beans on next-gen GPU requirements
Nvidia GeForce RTX 4090 is shown along with a hand holding the power cable adapter.

Sometimes, news about next-gen GPUs comes from unlikely sources -- today is one of those days. Corsair just spoke about its power supply units (PSUs) and cooling solutions in relation to the future of some of the upcoming best graphics cards. It turns out that Nvidia's RTX 50-series may not be that much more power-hungry than the current-gen cards, but there's more than just Nvidia to consider here.

Although unexpected, Corsair's statement sounds like good news. The company doesn't talk about any new solutions. In fact, Corsair seems to confirm that the power supply units (PSUs) we use today will still work fine for next-gen cards -- provided the wattage is sufficient.

Read more
Nvidia’s RTX 5090 may not be such a power-hungry beast after all
The RTX 4090 graphics card on a table alongside a set of cables held in hand.

The RTX 5090 will undoubtedly claim its spot atop the rankings of the best graphics cards when it's here, but that kind of power comes with a lot of ... well, power -- or more specifically, a high power draw. To that end, we've heard a lot of speculation about the RTX 5090 potentially decimating your power supply and needing over 600 watts of power. However, Segotep, a China-based PSU manufacturer, weighed in on the matter, and it seems that enthusiasts can hold off on buying a new monstrous PSU for a while yet.

It all started with claims that the RTX 5090 may feature not one, but two 16-pin power connectors. We've already seen some high-end PSUs sporting dual 12V-2x6 power connectors (made by manufacturers such as MSI), which could potentially power a GPU that draws far more than 600 watts.

Read more