Skip to main content

Full-size, 3D-printed Stargate portal replica took 1,000 hours to create

Stargate Project : a real stargate in the park of Mariemont museum.
What happens when you cross the world of ancient Egypt with the latest cutting-edge technology? The answer, as sci-fi fans will almost certainly know, is 1994’s Stargate, a movie that kick-started an entire multimedia franchise. But what happens when you cross Stargate with yet more groundbreaking high-tech?

If you’re anything like the folks at Belgium’s Musée royal de Mariemont, the answer to that question is a 3D-printed replica of the series’ iconic ring-shaped portal — sadly without the inter-dimensional travel part, though.

“We were approached by the museum as part of their planning for an exhibition called ‘From Stargate to Comics: The Egyptian Gods in the geek culture,’” Hermanns Christophe, CEO and owner of 3D-printing studio Vigo Universal, told Digital Trends. “In preparation for it, they came to us earlier this year and asked if we could use 3D printing to create a replica of the Stargate. We’re always excited about using 3D printing for unique projects, so we were happy to get involved.”

The lofty goal of building a 20-foot replica of the movie prop was a bold proposition. It wound up taking more than 1,000 working hours to create, and required the 3D printing of more than 2,000 separate parts, along with 10,000 cuttings. It involved a Flashforge 3D printer farm, Marchant Dice milling cutter, and a laser cutter.

“The biggest challenge was that we had no plans to work from,” Christophe said. “The only source materials we had were the movie and whatever images we could find on the internet. From that, we had to create everything for the 3D printing. This wasn’t a toy — this was something that had to look good as part of an exhibition, and had to be built to last.”

So what happens to the Stargate once the exhibition is finished, and how do we get our hands on it so it can take pride of place in our office? “We’ll have to ask the museum what they’re going to do with it after the exhibition,” Christophe laughed. “We don’t know what their plans are. But be warned: it’s very, very large. To move it is going to require a truck.”

Editors' Recommendations

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
NASA is testing a 3D printer that uses moon dust to print in space
The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility, and the print heads, plates and lunar regolith simulant feedstock that launches to the International Space Station.

The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility and the print heads, plates, and lunar regolith simulant feedstock that launches to the International Space Station. Redwire Space

When a Northrop Grumman Cygnus cargo spacecraft arrived at the International Space Station (ISS) this week, it carried a very special piece of equipment from Earth: A 3D printer that uses moon dust to make solid material.

Read more
The best 3D printers under $500
3D printers are finally affordable. Here are the best models under $500
anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2
 
Pros:

Read more
Ceramic ink could let doctors 3D print bones directly into a patient’s body
ceramic ink 3d printed bones bioprinting australia 2

Scientists use a novel ink to 3D print ‘bone’ with living cells

The term 3D bioprinting refers to the use of 3D printing technology to fabricate biomedical parts that, eventually, could be used to create replacement organs or other body parts as required. While we’re not at that point just yet, a number of big advances have been made toward this dream over the past couple of decades.

Read more