Skip to main content

3D-printed stainless steel is up to 3 times tougher than alternatives

3d printed steel marine grade 8a6b0820
Image used with permission by copyright holder
Investigators at several research institutions, including Lawrence Livermore National Laboratory, Ames National Laboratory, Georgia Tech University, and Oregon State University, have made a major breakthrough in the 3D printing of 316L, a type of versatile “marine-grade” stainless steel.

316L is a superior material to other marine grade steels — used in everything from oil pipelines and kitchen utensils to medical implants and engine parts — which have high strength, but low ductility. Ductility refers to the important ability of metals to plastically deform and adapt when they are put under stress. This quality, the opposite of brittleness, allows them to absorb energy and makes them more durable.

After designing the new steel material’s underlying microstructure with computer modeling, the researchers used two different laser 3D printers to fabricate thin plates of 316L for mechanical testing. They found that the new material can be up to three times stronger than steels manufactured using conventional techniques. “This opens the door for 3D printing real components,” Morris Wang, a materials scientist at Lawrence Livermore National Laboratory, told Digital Trends.

Image used with permission by copyright holder

At present, the work is still very much in the research stages, but it suggests that ultra-strong 3D-printed stainless steel could not be too far away. This would allow the aforementioned applications — such as engine parts, medical implants and more — to be made significantly tougher. In particular, the researchers think the advance could have applications in fields like aerospace and the oil and gas industries, where it is important to improve the durability of metal components because of the extreme conditions that they face. Although, hey, what self-respecting D.I.Y. 3D-printing enthusiast would turn down the opportunity to incorporate new ultra-tough materials into their workshops?

“Our next goal is to apply 3D-printing technology to other lighterm but more brittle materials, to see whether we can make them stronger and more ductile,” Wang continued. However, he added that the team is only focused on the research side and that, “We’ll leave industry people to commercialize our findings.”

A paper describing the work, titled “Additively manufactured hierarchical stainless steels with high strength and ductility,” was recently published in the journal Nature Materials.

Editors' Recommendations

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
NASA is testing a 3D printer that uses moon dust to print in space
The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility, and the print heads, plates and lunar regolith simulant feedstock that launches to the International Space Station.

The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility and the print heads, plates, and lunar regolith simulant feedstock that launches to the International Space Station. Redwire Space

When a Northrop Grumman Cygnus cargo spacecraft arrived at the International Space Station (ISS) this week, it carried a very special piece of equipment from Earth: A 3D printer that uses moon dust to make solid material.

Read more
The best 3D printers under $500
3D printers are finally affordable. Here are the best models under $500
anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2
 
Pros:

Read more
Ceramic ink could let doctors 3D print bones directly into a patient’s body
ceramic ink 3d printed bones bioprinting australia 2

Scientists use a novel ink to 3D print ‘bone’ with living cells

The term 3D bioprinting refers to the use of 3D printing technology to fabricate biomedical parts that, eventually, could be used to create replacement organs or other body parts as required. While we’re not at that point just yet, a number of big advances have been made toward this dream over the past couple of decades.

Read more