Skip to main content

Give a 3D printer artificial intelligence, and this is what you’ll get

A London-based startup has combined some of today’s most disruptive technologies in a bid to change the way we’ll build the future. By retrofitting industrial robots with 3D printing guns and artificial intelligence algorithms, Ai Build has constructed machines that can see, create, and even learn from their mistakes.

When CEO and founder Daghan Cam was studying architecture, he noticed a disconnect between small-scale manufacturing and large-scale construction. “On one side we have a fully automated production pipeline,” Cam explained at a recent conference in London. “On the other side we’re completely dependent on human labor.” With the emergence of more efficient printing technologies, he thought there must be a better way.

“We wanted to push the boundaries of how intricate we could design things through computation and how we could create them through 3D printing,” Cam said.

“We wanted to push the boundaries of how intricate we could design things.”

3D printing may be seen as the future of fabrication but it can be an expensive, time-consuming, and unscalable endeavor. Small objects are simple enough to print. Larger objects can often be prohibitively complicated. When you read about fully 3D printed airplanes, office spaces, or artworks, they’re not printed as a whole, but rather as many small parts that are pieced together afterward like a puzzle.

To scale up the printing process, Cam and his team strapped foam guns to KUKA robotic arms and programmed them to print intricate structures. To cut costs and expedite construction, they combined the standard layer-by-layer design with a latticework design that printed filament at angles while small fans simultaneously cooled and hardened the material. This allowed them to use a lot less material while still supporting strong and efficient structures.

But it was still too slow. Fabrication leaves little room for error, so the robots had to print at a snail’s pace, excreting filament precisely and uniformly, then waiting for it to dry. If Ai Build wanted quicker — and thus cheaper — printing, it would either risk structural defects or have to overcome a fundamental flaw in robotics.

“Our robots were blind,” Cam said. “They take instructions from a computer and blindly execute them. If there’s any problem they don’t notice and can’t adapt.”

Large Scale Robotic 3D Printing

To solve this problem, Cam and his team attached cameras to their robots and used machine vision algorithms to analyze the structures as they were being printed. “The goal was to create a feedback loop between the physical environment and the digital environment,” Cam said.

With its new set of eyes, the robotic arm could detect defects and compensate for them in subsequent layers. The results were quickly printed, Zaha Hadid-esque structures that Cam says were printed in about half the time it would take without the AI.

Ai Build’s first stand out structure was printed for just $185 — a fraction of the $31,000 Cam said competitor quoted to print a structure with the same specifications. Not only did the competitors lack AI, they would also need to print the piece in multiple parts. The ability to print structures as a single, complete unit gives Ai Build an undeniable edge.

“The goal was to create a feedback loop between the physical environment and the digital environment.”

But the startup has limits to scale. Just last week at GPU Technology Conference in Amsterdam, they premiered a five meter wide, five meter deep, four and one-half meter tall structure designed in partnership with renowned firm Arup Engineers. Dubbed the “Daedalus Pavilion” after the legendary craftsmen who built the Labyrinth, the 350-pound pavilion consists of 48 individual parts. Despite its impressive size, it took just fifteen days to print and a half-day to construct. Given the company’s rate of about $100 per robot hour, an object of this size would cost a little over $35,600.

“The structure was quiet optimized for using material efficiently and to minimize production time so the whole structure was very lightweight in the end,” Cam said.

The project saw the young company continue its partnerships with GPU-manufacturer NVIDIA and robotics-manufacturer KUKA, two established firms at the top of their respective industries.

Beautiful as it may be, the Daedalus Pavilion is just a proof of concept. And though the startup has an obvious interest in design, it’s focus is on revolutionizing large-scale construction with 3D-printed structures such as concrete casting molds.

Ai Build
Ai Build
Ai Build

Ai Build has also begun early development of a futuristic chandelier called aiPort, which is designed to integrate all smart devices into a single place. With a series of gestures or words, users can turn on a light bulb, turn down the air conditioning, and turn up the music on their stereo thanks to a panel of cameras and microphones sprawled across the chandelier. It’s like Tony Stark’s Jarvis for the upper middle class. Cam stresses that aiPort is still a prototype though, placed on the back burner while his company tends to the 3D printing project.

Many of today’s startups take an emerging technology and adapt it for an age old industry. AI is present from the backend of finance to the front end of healthcare. Robots now replace receptionists, foods runners, and factory workers around the world. Cam and his team have instead recognized a flaw in construction and combined three emerging technologies to address it in an efficient way. The technologies they use aren’t particularly innovative in their own right, but when used in conjunction with one another, they have the potential to revolutionize the construction industry.

[amz_native_shopping asins=”B014I55NBI,B003KYXAQO,B000GOF5S2,B00JDVIPOU” linkid=”a494d199fa1ed0a4b4c533973df85241″ title=”Related Products”]
Dyllan Furness
Former Contributor
Dyllan Furness is a freelance writer from Florida. He covers strange science and emerging tech for Digital Trends, focusing…
The Ioniq 5 is once again eligible for the $7,500 tax credit
2025 Hyundai Ioniq 5

After a brief and confusing absence, the Hyundai Ioniq 5 is once again eligible for the full $7,500 federal tax credit — and this time, it's sticking around (at least for now). So, what happened? Let’s unpack the ride.

The Ioniq 5, a sleek and tech-savvy electric crossover, initially made headlines not just for its design, but for being built at Hyundai’s brand-new Metaplant in Georgia. That domestic assembly qualified it for the EV tax credit under the Inflation Reduction Act (IRA), which requires vehicles to be made in North America with batteries sourced from trade-friendly countries. But early in 2025, the Ioniq 5 vanished from the list. Why? Likely due to its battery packs, which were then still being sourced from SK On’s Hungarian facility.

Read more
Sebastian Stan lays out Bucky’s future after Thunderbolts
Sebastian Stan in Thunderbolts.

There are some spoilers ahead for the ending of Marvel's Thunderbolts. Stop reading now if you don't want to be spoiled.

Earlier this year, Captain America: Brave New World briefly introduced a new direction for James "Bucky" Barnes, a character Sebastian Stan has been playing since 2011 in Captain America: The First Avenger. In Brave New World, the former Winter Soldier apparently retired from being a reformed hero and went into politics by running for Congress. Thunderbolts reveals that Bucky won his election to the House of Representatives. But his stay in Congress was short.

Read more
Jeep Compass EV breaks cover—but will it come to the U.S.?
jeep compass ev us newjeepcompassfirsteditionhawaii  4

Jeep just pulled the wraps off the all-new Compass EV, and while it’s an exciting leap into the electric future, there's a catch—it might not make it to the U.S. anytime soon.
This is a brand new electric version of the Jeep Compass, and being built on Stellantis' STLA platform—the same architecture underpinning models like the Peugeot E-3008 and E-5008—it looks much slicker and packs a lot more inside than previous versions of the Compass.
Let’s start with what’s cool: the new Compass EV is packing up to 404 miles of range on a single charge, a 74 kWh battery, and fast-charging that gets you from 20% to 80% in about 30 minutes. Not bad for a compact SUV with Jeep's badge on the nose.
There are two versions: a front-wheel-drive model with 213 horsepower and a beefier all-wheel-drive version with 375 horsepower. That AWD setup isn’t just for looks—it can handle 20% inclines even without front traction, and comes with extra ground clearance and better off-road angles. In short, it’s still a Jeep.
The design's been refreshed too, and inside you’ll find the kind of tech and comfort you’d expect in a modern EV—sleek, smart, and ready for both city streets and dirt trails.
But here’s the thing: even though production starts soon in Italy, Jeep hasn’t said whether the Compass EV is coming to America. And the signs aren’t promising.
Plans to build it in Canada were recently put on hold, with production now delayed until at least early 2026. Some of that might have to do with possible U.S. tariffs on Canadian and Mexican vehicles—adding a layer of uncertainty to the whole rollout.
According to Kelley Blue Book, a Stellantis spokesperson confirmed that the company has “temporarily paused work on the next-generation Jeep Compass, including activities at” the Canadian plant that was originally meant to build the model. They added that Stellantis is “reassessing its product strategy in North America” to better match customer needs and demand for different powertrain options.
So while Europe and other markets are gearing up to get the Compass EV soon, American drivers might be left waiting—or miss out entirely.
That’s a shame, because on paper, this electric Jeep hits a lot of sweet spots. Let’s just hope it finds a way over here.

Read more