Skip to main content
  1. Home
  2. Emerging Tech
  3. News

Genetically engineered algae could bring off-grid solar power to rural Africa

Add as a preferred source on Google

From making eco-friendly shoes to creating a new type of biofuel, algae turns out to be a pretty darn versatile material. Researchers at the U.K.’s University of Cambridge have just demonstrated another use case: a more efficient bio solar cell that’s powered by genetically modified live algae.

“It’s been known for some time that photosynthetic microorganisms — single-celled algae — produce small amounts of electrons, stimulated by light, that can be harvested by electrodes to produce a current,” Professor Chris Howe, one of the lead researchers on the project, told Digital Trends. “You can think of systems based on this as a biological version of a photovoltaic cell. At present, the power per unit area from those cells is low, with the maximum reported as 0.1 watt per square meter. However, we can use the devices to power small items such as environmental sensors. We’ve succeeded in increasing the power output fivefold.”

Recommended Videos

The new technique developed in collaboration by researchers from the university’s departments of biochemistry, chemistry, and physics involves a two-chamber system, in which the two central processes involved in the operation of a solar cell – generation of electrons and their conversion into power – are separated. This allowed them to improve the performance of the power delivery unit through miniaturization. Because fluids behave differently at miniature scales, this setup resulted in more efficient cells with lower internal resistance and decreased electrical losses.

Despite being 5 times more efficient than previous algae-powered bio cells, however, the team’s creation still produces only one-tenth the power density provided by conventional solar fuel cells. That doesn’t mean it’s without a use, though. “Conventional solar cells produce a higher power density than our devices, although our devices are likely to be cheaper to make — both in financial investment and energy investment — and to decommission at the end of their life,” Howe continued. “In addition, our devices can produce some power in the dark, using materials made by the algal cells in the light, in contrast to conventional solar cells.”

Howe noted that while conventional solar cells are likely to be preferred for large-scale energy production for grid supply, their bio solar cell could be useful in other scenarios. For example, in rural Africa, sunlight is abundant, but there’s no existing electric grid system.

Additional work needs to be carried out to reach that point, however. “Scaling up is always a big hurdle in moving from lab to real-world implementation,” Howe said. “We’re keen to commercialize the systems, but that will be a few years off.”

A paper describing the work was published recently in the journal Nature Energy.

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
Anker just exposed a big problem with portable power stations
Appliance, Device, Electrical Device

When you're shopping for a portable power station, there's one number that's almost impossible to ignore: battery capacity. A 2 kWh battery should give you roughly 2 kWh of usable power, right? Unfortunately, things aren't quite that simple. Anker SOLIX has published new efficiency data for its S Series portable power stations, and it's putting the spotlight on something that doesn't get nearly as much attention as capacity: how much of the energy stored inside the battery actually makes it to your devices.

According to Anker, portable power stations are commonly advertised with efficiency figures measured under relatively heavy loads, where they can reach roughly 89% to 92% efficiency. But that's not necessarily how most people use one during an outage. Think about what you'd actually plug in. A Wi-Fi router might sip power continuously, a refrigerator switches its compressor on and off throughout the day, and a CPAP machine could run overnight. Together, those devices may draw just a fraction of what a large power station is capable of supplying. And that's where efficiency can start slipping.

Read more
OpenAI’s first gadget sounds like a tiny expressive AI companion
The device will have a doughnut-shaped body, built-in cameras, and moving parts
OpenAI press image

For months, reports have suggested that OpenAI’s first hardware product would be a screen-free smart speaker designed to act more like an AI companion. We already knew it could understand its surroundings, be carried around the home, and proactively help users. A new Bloomberg report now gives us a clearer picture of what the device may actually look like.

As per the report, OpenAI’s first gadget will be shaped like a doughnut and measure about the same size as a hockey puck. You will be able to carry it between rooms or leave it nearby on whatever surface is convenient. The device is expected to be on the expensive side, as the company has pondered pricing it around $300 to $400. A release is currently planned for 2027.

Read more
Google Antigravity just built an AI translator that works without the internet
Electrical Device, Switch, Robot

Google has shown off a new AI project that could make language barriers a little less intimidating, and it doesn't need an internet connection to do it. The company has introduced the Gemma Translator, a compact prototype built in collaboration with Antigravity. Unlike most AI translation tools that rely on cloud processing, this device runs entirely offline using Gemma 4 E2B, Google's lightweight open model. Everything happens locally on the device, making it both portable and independent of an internet connection. The prototype is powered by a Raspberry Pi 5 and includes a microphone and speaker inside a custom 3D-printed enclosure, creating a self-contained translator you can carry almost anywhere.

AI translation, without the cloud

Read more