Skip to main content

NASA’s Perseverance rover is perfectly balanced for its trip to Mars

Testing Perseverance's Center of Gravity

NASA’s Perseverance rover is preparing for launch in the next few months by undergoing final checks, and it has just made it through one more item on the list: Ensuring that it is correctly balanced.

Part of the final preparations for readying the rover for its trip to Mars is checking that its center of gravity is in the correct place, which is done using a tool called a rover turnover fixture. The rover is placed onto a frame support and spun around lengthways, like a pig on a spit, to check its balance along its x-axis.

With that checked, the rover is then moved to a spin table, which rotates around like a record player. This allows the engineers to check its center of gravity relative to its z-axis and y-axis (top to bottom and left to right).

This image of the Perseverance Mars rover was taken at NASA's Kennedy Space Center on April 7, 2020, during a test of the vehicle's mass properties.
This image of the Perseverance Mars rover was taken at NASA’s Kennedy Space Center on April 7, 2020, during a test of the vehicle’s mass properties. NASA/JPL-Caltech

Any small imbalances in weight distribution could cause problems like parts wearing down faster than expected or issues with balancing when the rover moves over rough surfaces or extreme slopes. So these are accounted for by adding tiny weights to the opposite side of the rover wherever there is an imbalance. In total, after its calibration, the team added 13.8 pounds of weight to the rover, which NASA says brings its center of gravity to within 0.025 millimeters of where it should be.

The total rover now weighs 2,260 pounds, which will make it the heaviest payload ever delivered to the surface of Mars. More weight means it is more difficult to land the rover safely, as the very thin atmosphere of Mars makes it hard to slow the rover as it falls. NASA has therefore been working on a supersonic parachute system that can slow the craft as it enters the atmosphere at more than 12,000 mph. Perseverance’s massive parachute canopy, made of nylon, Technora, and Kevlar fiber, deploys to a width of 70.5 feet and will slow the craft from Mach 1.7 to 200 miles per hour.

Perseverance is set to launch in a two week period beginning on July 17 this year.

Editors' Recommendations

Georgina Torbet
Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…
Watch this solar eclipse captured from Mars
solar eclipse captured from mars

NASA has shared remarkable footage of a solar eclipse captured by its Perseverance rover from the surface of Mars.

The video (shown in real-time below) was taken by Perseverance’s Mastcam-Z camera earlier this month and shows Phobos, Mars’ potato-shaped moon, passing across the face of the sun.

Read more
NASA marks a year since Mars drone’s historic first flight
NASA's Ingenuity helicopter.

NASA’s team at the Jet Propulsion Laboratory (JPL) in Southern California is celebrating one year since its plucky Ingenuity helicopter became the first aircraft to achieve controlled, powered flight on another planet.

Ingenuity's maiden flight took place on April 19, 2021, and the team marked occasion by sharing a video showing that special moment 12 months ago when news came through that the drone-like aircraft had successfully performed its record-breaking first flight:

Read more
What the Perseverance rover is hoping to find in the Jezero delta
Mars Perseverance Sol 388 - Right Mastcam-Z Camera: NASA's Mars Perseverance rover acquired this image using its Right Mastcam-Z camera. Mastcam-Z is a pair of cameras located high on the rover's mast. This image was acquired on March 24, 2022 (Sol 388) at the local mean solar time of 08:08:28.

The Perseverance rover is currently beaming its way across the surface of Mars, heading for an area of the Jezero crater called the delta. This is one of the most exciting locations to be explored on Mars so far because it was once the site of an ancient river delta. In a recent blog post, a NASA scientist explained how studying the delta could help understand the history of Mars, and could even find evidence if there was ever life on the planet.

The promise of the delta is so great because we know that having water on the surface of a planet for a significant amount of time is both key to the development of life and a great way to learn about geological history, as Adrian Brown, Deputy Program Scientist at NASA explains: "A delta forms when a sediment-laden river runs into a body of standing water, and as it does so, slows and can no longer hold the sediment, so it drops the rocks, gravel and soil into the water body, which gently sinks to the bottom and forms a delta. Over time, the delta becomes a layered repository, like a book with pages, which one can turn over each day to learn more about the history of Mars."

Read more