Skip to main content
  1. Home
  2. Phones
  3. Mobile
  4. News

Qualcomm and ZTE hit new mark for millimeter-wave 5G speeds

Add as a preferred source on Google

Qualcomm has achieved a new milestone for 5G downlink speeds in conjunction with the Shenzhen, China-based technology company ZTE. The test was conducted in China and utilized Qualcomm’s 5G millimeter-wave (mmWave) technology to achieve a peak downlink speed of over 2.43GB per second with a single device, according to an official release from Qualcomm. Standard 4G speeds, by comparison, commonly reach 100MB per second under typical real-world conditions.

The Qualcomm/ZTE tests also managed to reach a peak download speed of over 5GB per second on a single device by using carrier aggregation, with a total of six 200MHz carriers on the mmWave band and uplink.

Recommended Videos

For the next step of 5G, we should fully leverage the advantages of 5G mmWave technology to unlock higher benefits and empower a digital, intelligent society.

The tests used a special device that came equipped with the latest version of Qualcomm’s Snapdragon modem and network infrastructure built by ZTE.

“This latest milestone with ZTE underscores important progress toward 5G mmWave commercialization in China to unleash the full potential of 5G and drive mmWave adoption globally,” said Yan Chenwei, senior vice president of product management at Qualcomm, in a press release. “For the next step of 5G, we should fully leverage the advantages of 5G mmWave technology to unlock higher benefits and empower a digital, intelligent society.”

Millimeter waves are extremely high radio frequencies found on the electromagnetic spectrum between 30GHz and 300GHz. Due to high atmospheric absorption, millimeter-wave broadcasts were previously restricted to short-range broadcasts, such as airport security scanners, military radar (science fiction fans may recognize the term from the extraordinarily sensitive personal radar systems in Neal Stephenson’s novel Snow Crash), or automated missile defense systems.

Qualcomm first publicly got out in front of 5G mmWave in 2019, in hopes that it could use these previously untapped frequencies to fuel the corresponding increase in wireless speeds. (Some analysts have noted that due to the increased emphasis on mobile devices in the last couple of decades, 5G had to go somewhere new on the EM spectrum, as the rest of it was rapidly filling up. Millimeter-wave was essentially free real estate.)

The joint test with ZTE is the end result of what Qualcomm claims is over 10 years of engineering to attempt to solve what had previously been seen as an insoluble problem. That, in turn, opens up new resources for 5G networks in advance of their impending rollouts.

Qualcomm, headquartered in San Diego, has been in operation since 1985. Primarily known for its chip manufacturing — if you’re American and have ever owned a smartphone, it probably contained parts from Qualcomm, at least until very recently — it’s recently diversified its business into other areas such as the automotive industry and IoT. Its successful mmWave test marks its latest in a long series of R&D investments into the technology.

Thomas Hindmarch
Former Contributing writer
Thomas Hindmarch is a freelance writer with 20 years' experience in the gaming and technology fields. He has previously…
One of my favorite exploration games is coming to iPhone. Even an iPhone 11 can run it
No Man’s Sky might be the game that finally makes me take iPhone gaming seriously
no man's sky

There are games I play to finish, and there are games I play simply because I want to disappear somewhere else for a while, and No Man’s Sky comes in this second category. Despite its disastrous launch, Hello Games' continued support turned the game around, making it one of gaming's biggest comebacks.

Now, ten years of updates have turned Hello Games' space sandbox into one of my favorite games for pure exploration and depth. Soon, this enormous universe is going to live on something as mundane as the phone in your pocket. Hello Games is bringing No Man’s Sky to iPhone and iPad on October 28, and the hardware requirements are surprisingly forgiving. You'll need an iPhone 11 or newer, or a third-generation iPad Air or newer.

Read more
Google’s older Pixels may have just become far better retro gaming machines
Google Pixel 11 Pro Review Zenless Zone Zero

I've spent enough time trying to turn Android phones into game consoles to know that raw horsepower only gets you so far. On the Red Magic 11S Pro, I've tested console emulation alongside Android games and eventually pushed things much further by getting the PC version of Ghost of Tsushima running locally through GameHub.

While all of this was possible thanks to powerful Snapdragon hardware, there's another reason Qualcomm-equipped Android devices have traditionally been particularly attractive to emulator enthusiasts. Adreno, the GPU that powers these devices, have access to custom graphics drivers such as Turnip. So phones using ARM's Mali GPUs haven't had the same advantage. But now, ARMSX2 2.8.3 is finally changing that.

Read more
Samsung may give the Galaxy S27 Ultra a major eye comfort upgrade
A new leak suggests Samsung could add DC dimming to reduce OLED flicker on its next flagship phones.
Samsung Galaxy S26 Ultra smartphone in blue color.

Samsung’s Galaxy S27 Pro and Galaxy S27 Ultra are shaping up to look quite different from the current generation, but the changes underneath may not be nearly as dramatic. Camera processing is reportedly being tweaked for warmer, more natural-looking photos, while certification filings point to a much-needed battery bump.

A fresh leak, however, points to an upgrade that could matter a lot more to people with sensitive eyes. Tipster WalleGalaxy claims Samsung will introduce DC dimming support on the Galaxy S27 Pro and Ultra, potentially moving away from the PWM-only approach it has relied on for years. The current Galaxy S26 series still uses PWM at around 480Hz and offers no DC-like flicker reduction option.

Read more