Skip to main content

3M MPro110 Projector Review

3M MPro110 Projector
“As a first-generation proof of concept product, 3M's MPro110 delivers a solid, satisfying performance.”
Pros
  • Battery powered; highly portable; fan-less operation; VGA and composite connections
Cons
  • Dim output limits range; short VGA cable; lens suffer from pin-cushioning

Summary

3M’s MPro110 is the first of a new wave of tiny digital projectors about to wash onto the market. This sector saw some bounce earlier this year with Microvision, Texas Instruments and 3M all talking up their respective micro projector ventures, which will eventually find themselves incorporated into cellular phones, cameras, etc. But the MPro110, available here and now, follows a more traditional route. A pocket-sized digital projector that handles feeds from both VGA and composite video sources, we’re happy to report that it’s a solid fit for the average road warrior. And yes, it really does fit in the palm of your hand.

Features and Design

The darling feature of the 3M MPro110 is, naturally, its size. At roughly 4.5 inches long, two inches wide and just under an inch thick, the device is bigger and thicker than a Blackberry Pearl smartphone, but smaller than a 2.5-inch portable hard drive. The case is essentially an oblong box with rounded corners. The sides are black plastic, but the top plate, front end cap and door for the rechargeable battery on the back are matte silver.

Inside is 3M’s micro projector engine. The imager technology is Liquid Crystal on Silicon (LCoS). The projector’s native resolution is VGA (640×480 pixels), but it will display up to WXGA (1280×768) quality. Light is provided by LEDs and output is rated at 12 lumens. The unit further consumes 1.5 watts and 3M states that the Lithium Ion battery will give 40-60 minutes per charge (it can of course be used while the AC adapter is plugged in).

The lens is recessed and thus protected from damage or fingerprints, and a thumb wheel adjusts focus. The MPro110 accepts VGA or composite video signals and has separate ports for each as well. 3M indicates that those two inputs should cover most of the devices you might be interested in connecting to the MPro110 including computers, PDAs, smartphones, camcorders, digital cameras or media players. A sliding power switch, DC-in power port and light that indicates on or charging state rounds out the I/O.

The top plate has a glossy black insert that looks like it could be a screen, but it’s purely decorative. The bottom has a quarter-inch threaded socket, handy for mounting the unit on a tabletop tripod. The unit is fan-less and the cooling grills on the top, side and bottom add some interesting surface texture too. In short, overall, it’s an attractively bland design.

What’s in the Box

Along with the projector, 3M includes an AC adapter; composite video (with an RCA plug gender changer) and VGA cables; a main manual; quick-start guide; and supplemental battery manual.

3M Micro Projector
Image Courtesy of 3M

Performance and Use

The projector is extremely basic, offering no way to control any parameters such as output level, resolution or keystone correction. Setting up is therefore just a matter of plugging in the source video, aiming and focusing. Because the device is so small and light, adjusting its position can be a challenge, and this is where the quarter-inch threaded socket comes in handy. Mounting it on a tabletop tripod makes it easier to refine position so that you get a reasonably rectangular image.

3M says the unit’s projection distance ranges from 10-71 inches, producing image sizes of 5-40 inches. On our test unit, we couldn’t focus sharply once our projector-to-screen distances went beyond approximately five feet, although large text in PowerPoint slides could still be easily read. A bigger issue is the limited light output. Even entry-level tabletop projectors offer 1,200 Lumens of light output, so you can imagine that the MPro110’s output of 12 Lumens is dim, and to see an image projected from six feet away, you’ll need a darkened room. The inverse square law of light output teaches a strong lesson here: The bigger you want to project, the dimmer the image will be — and the more faded the color.

We used a 20×30 inch sheet of white foam board as a makeshift screen and from 42 inches away, the MPro110 could fill it with a 30 inch (measured diagonally like a TV screen) image bright enough to see in a room lit by normal daylight. (Though you’d never mistake it for being eye-piercingly bright…) At this level of magnification, you could make out screen text on most Web pages and video from a camcorder was easy to watch. However, colors were starting to lose their saturation.

Moving along, LEDs are known for their coolness of operation, and the MPro110 gets just slightly warm in use. The big bonus here really being that the device is completely silent since it has no fan.

On the downside though, the lens exhibited strong pincushion distortion. This was quite distracting when projecting a computer display, since distortion is most noticeable on rectangular forms like documents or Web pages. When utilized with video content, it was less bothersome, and in both cases, the distortion wasn’t really noticeable towards the center. Worth noting: On our test unit, the lens focusing mechanism further seemed loose and prone to rattling.

The VGA cable that comes with the unit is around 18 inches. That’s quite short, but the cable is also too stiff and bulky, given the size of the device it is being connected to. The projector uses a proprietary connector, which was easy to dislodge when trying to position the unit. The composite video cable is a common design with a 1/8 inch jack on one end and an RCA connector on the other.

Conclusion

If you compare the MPro110 to a standard digital projector, it comes up short on many measures. Think dim output; limited enlargement; a lens that’s not corrected for linear distortion; native VGA resolution; and a total dearth of added features like audio or HD inputs. But consider the gadget on its own merits, and there’s also much to add to the list of pluses. Frankly, what’s not to like about a battery-powered device that fits in your pocket and gives you a usable, virtual 30-inch display? As a first-generation proof of concept product, 3M’s MPro110 delivers a solid, satisfying performance. Regardless, there’s still plenty of room here for growth and refinement.

Pros:

• Battery powered
• Highly portable
• VGA and composite video ports allow connection to a variety of devices
• Cool fan-less operation

Cons:

• Dim output limits range of useful enlargement
• VGA cable is stiff, bulky and short
• Lens suffers from pin-cushioning

Editors' Recommendations

Digital Trends Staff
Digital Trends has a simple mission: to help readers easily understand how tech affects the way they live. We are your…
Soundcore Liberty 3 Pro earbuds go after Sony’s wireless hi-res crown
Anker Soundcore Liberty 3 Pro.

Anker's Soundcore brand of personal audio devices just released the latest in its Liberty line of true wireless earbuds, and the company seems to be throwing everything it has at them. The $170 Liberty 3 Pro feature a 30% smaller shape than their predecessor, the Liberty 2 Pro, plus they come equipped with active noise cancellation (ANC) and hi-res Bluetooth codecs, things the original version of the older model lacked. The Liberty 3 Pro come in four colors -- black, white, gray, and purple. If you buy them between today and October 14, you can save $20 at Amazon and at other retailers.

We were blown away by how great the Liberty 2 Pro performed. We only noted a few drawbacks -- a bulky design, and some fiddly buttons. Soundcore was apparently taking careful note -- the Liberty 3 Pro are notably smaller (though they'll likely still stick out from your ears a bit), and the tiny physical buttons have been ditched in favor of touch controls. They also look decidedly more high-end, with a mirrorlike finish and chrome accents. Soundcore says they'll feel more comfortable thanks to the shape of the redesigned silicon earwings.

Read more
Sony WH-1000XM4 Vs. WH-1000XM3: What’s the difference and which should you buy?
Sony WH-1000XM3 Wireless Noise-Canceling Over-Ear Headphones

If you've only just started researching wireless headphones, let me give you the Cliff's Notes version: Until August 2020, the Sony WH-1000XM3 were the best wireless headphones and the best active noise-canceling (ANC) wireless headphones you could buy.

What changed in August, you ask? Sony debuted the follow-up to the XM3, predictably called the WH-1000XM4. For the same price as the XM3 -- $350 -- the XM4 comes with a slew of small but meaningful improvements, and they've now taken their rightful place at the top of our lists of recommended headphones.

Read more
ATSC 3.0: Every 2020 TV that supports NextGen TV
Samsung Q900

The new over-the-air broadcast standard ATSC 3.0, also known as NextGen TV, is on its way. A handful of TV stations in Las Vegas, Nevada, and Portland, Oregon are scheduled to go live in late May and early June, respectively, with another 38 markets slated to be up and running by the end of 2020.

ATSC 3.0 unlocks a bunch of goodies for broadcast TV, including 4K HDR resolution, Dolby Atmos and DTS-X audio, better reception, and even on-demand programming. We've got a full ATSC 3.0 explainer for more info.

Read more