Skip to main content

First working 3D-printed handgun has politicians sweating bullets

3D printed gunOver the weekend, Forbes was on the scene as the first handgun constructed entirely from plastic 3D-printed parts was fired. Prior to this event, skeptics claimed that such an act was impossible, arguing that a firearm made with plastic parts simply couldn’t withstand the heat and pressure associated with firing a bullet. And yet, here we are with footage on YouTube for everyone to see, and schematics online for anyone to print.

Not surprisingly, this has ruffled some feathers up on Capitol Hill. It’s not that lawmakers are suddenly worried that 3D printers are the spark that will ignite World War III –  3D printed guns have been in the news before without much of a response from Washington. What’s troubling about this particular gun is that, unlike all previous 3D-printed guns we’ve seen, this one (called the Liberator) is made almost entirely from plastic parts, rendering it invisible to metal detectors.

Technically, this is a violation of federal law under the Undetectable Firearms Act of 1988, but as a second-year law student at University of Texas at Austin, designer Cody Wilson was well aware of this, and made sure to retrofit the pistol with a 6-ounce chunk of steel to make it legal. It was a quick fix, but there are a few senators in Washington that are concerned not everyone will take the extra step, and are currently pushing new legislation to make Wilson’s design illegal. On Sunday, Sen. Chuck Schumer (D-N.Y.), endorsed a bill entitled the Undetectable Firearms Modernization Act, that would bring the 1988 law up to date by banning 3-D-printed guns that “have no metal and could therefore slip through a metal detector.”

liberator pistolThis isn’t the first time Wilson has come up against opposition for his project. Initially, he attempted to raise funds for his “Wiki Weapon” project on the popular crowdfunding site IndieGoGo, but the site suspended his campaign just three weeks in, citing a terms of service violation as the reason. But that didn’t stop Wilson. After being denied access to the funds he had already raised, he began accepting donations on his website,, via PayPal and BitCoin, and eventually reached his goal of $20,000 in September of 2012.

With all the necessary funds to embark on his project, Wilson purchased a Stratsys uPrint SE – a high-end 3D printer – and got to work on a prototype. Everything seemed to be on track, but when Stratsys caught wind of what Wilson was doing with the printer and realized that he wasn’t a licensed firearms manufacturer, they immediately took action to repossess the machine. In a statement to the press, Stratsys explained that it was not willing to allow its hardware to be used for a project that violated federal firearms laws.

So, rather than risking the possibility of being arrested, Wilson decided to jump through all the necessary hoops to avoid any legal repercussions by obtaining a firearm manufacturer’s license and incorporating Defense Distributed into a company. A few months later, and with a new printer at his disposal, Wilson’s idea has finally materialized – but more legal struggles undoubtedly lie ahead of him.

We can’t predict the outcome of Senator Schumer’s proposed legislation, but regardless of what happens on Capitol Hill, Wilson still has problems with Google to worry about. The name “The Liberator” was intended to pay homage to the mass-produced pistols that were air-dropped by the Allies into France during its Nazi occupation in World War II, but that’s not the liberator that’s popular on search engines. If you search for “the Liberator” online, Wilson’s 3D printed pistol ranks second on Google – just below the popular sex pillow of same name, which seems to suggest “make love, not war” by some sort of divine serendipity.

Drew Prindle
Former Digital Trends Contributor
Drew Prindle is an award-winning writer, editor, and storyteller who currently serves as Senior Features Editor for Digital…
Father’s Day Gift Idea: These cheap 3D printers are on sale for less than $300
best 3d printer deals featured image

3D printing has become a lot more accessible these days than it had been in the past. Back then, you'd have to shell out as much as $1,000 for one. Today, however, there are plenty of budget 3D printers out that cost less than $300, such as the Monoprice Mini Delta, Longer Orange 10, and Comgrow Creality Ender 3. These are fantastic gifts for dad and if you order today they'll surely arrive before Father's Day.
Monoprice Mini Delta
-- $160, was $176

The incredible thing about the Monoprice Delta Mini, aside from the fact that it's one of the cheapest 3D printers on the market, is that it boasts a range of advanced features you typically won't find in a $160 3D printer. It has a sturdy, all-metal frame, a heated build plate that helps prevent warping, automatic bed leveling functionality, a maximum resolution of 50 microns, a full-color LCD screen, Wi-Fi connectivity, and compatibility with a wide range of materials. For something that costs less than a FitBit, all that stuff baked-in is pretty impressive. That's not to say the Monoprice Mini Delta is all that great. For starters, it's called Mini because its printing area is only 110 millimeters in diameter (4.3 inches), and 120 millimeters tall (4.7 inches), which definitely puts a limit on what objects you can print.

Read more
The 50-year old Silicon Valley lab that practically invented modern computing
50 years xerox parc alan kay

If I was a betting man, I’d wager that you’re reading this article from home. Why? Because, in the age of COVID-19, home is where just about everyone is these days. The fact that you’re reading this article in the way that you are, however, owes more than a passing debt to a Silicon Valley research laboratory called Xerox PARC, an abbreviation for Palo Alto Research Center.

Turning 50 years old this year, PARC changed the way that we use computers on a profound level. Far outstripping its remit as the research and development wing over the Xerox Corporation, it was to computing what Neils Bohr's institute at Copenhagen was for quantum physics in the 1920s or Motown Records was for soul music in the 1960s.

Read more
3D printing lets hospitals make ventilator substitutes with common equipment
PEEP mask 1

Materialise 3D Prints Non-Invasive PEEP Masks to Alleviate Ventilator Shortage

Many hospitals around the world currently have an alarming shortage of mechanical ventilators, which they can use to treat COVID-19 patients. Responding to this crisis, Belgian 3D printing company Materialise has developed a 3D-printable device that transforms standard equipment available in the majority of hospitals into a mask that can help coronavirus patients get the oxygen they desperately need into their lungs. The company’s smart solution promises to create high positive pressure in patients’ lungs without the use of a traditional ventilator.

Read more