Skip to main content

Perseverance rover will soon begin collecting samples from Mars

NASA’s Perseverance Mars rover took a selfie with the Ingenuity helicopter, seen here about 13 feet (3.9 meters) from the rover. This image was taken by the WASTON camera on the rover’s robotic arm on April 6, 2021, the 46th Martian day, or sol, of the mission.
NASA’s Perseverance Mars rover took a selfie with the Ingenuity helicopter, seen here about 13 feet (3.9 meters) from the rover. This image was taken by the WASTON camera on the rover’s robotic arm on April 6, 2021, the 46th Martian day, or sol, of the mission.  NASA/JPL-Caltech/MSSS

It’s been a busy week on Mars, with the arrival of China’s Zhurong rover and it sending its first images back to Earth. And elsewhere, in a different area of the planet, the helicopter Ingenuity is preparing for its sixth flight which aims to be further and faster than its previous trips. But don’t forget about NASA’s two rovers, Perseverance and Curiosity, which are also trundling along doing science work on the red planet.

NASA’s Jet Propulsion Laboratory recently shared an update on what the rovers have been up to, including the plans for the next phase of the Perseverance mission.

With the helicopter Ingenuity off exploring on its own, the Perseverance rover has been freed up to perform observations of the martian rock. It recently used its robotic arm to get up close and personal with the Martian surface, and now it has moved onto the collection of samples. This is one of Perseverance’s major goals: To collect samples of Martian rocks and regolith, which will be picked up and returned to Earth in a future mission called Mars Sample Return. Getting these samples back to Earth is necessary so they can be analyzed in more detail than is possible using the limited instruments available on a rover.

The rover is armed with a special system of tubes for the collection of samples, but this is the first time such a system has been used. So it needs to be tested before it can be used, and that’s what Perseverance is gearing up for.

“In order to ensure that we are ready for this first one of a kind leg of collecting samples and preparing them to bring them back to earth we need to ensure that we can safely place and load the robotic arm on the surface of Mars,” explained Perseverance Surface Mission Manager Jessica Samuels. “So we first did this by loading the core drill and pushing against the Rover itself… The next day we successfully demonstrated the capability of placing the core on the surface of Mars.”

In addition, JPL shared that Perseverance has been traveling around the planet and has driven 345 meters so far. Samuels said there would be more traversing in the rover’s future: “Over the next couple of weeks we hope to continue to check out more of our autonomous navigation capabilities and are excited about the hundreds and hundreds of meters ahead.”

Editors' Recommendations

Georgina Torbet
Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…
Relive Mars rover’s spectacular landing exactly 3 years ago
NASA's Perserverance Mars rover.

A screenshot from actual footage of NASA's Perseverance rover landing on Mars in 2021. NASA/JPL

It’s exactly three years since NASA’s rover, Perseverance, touched down on Mars in spectacular fashion.

Read more
NASA is looking for volunteers for yearlong simulated Mars mission
The CHAPEA mission 1 crew (from left: Nathan Jones, Ross Brockwell, Kelly Haston, Anca Selariu) exit a prototype of a pressurized rover and make their way to the CHAPEA facility ahead of their entry into the habitat on June 25, 2023.

If you've ever wanted to visit Mars, then NASA has an offer for you. Though the agency isn't sending humans to the red planet quite yet, it is preparing for a future crewed Mars mission by creating a simulated mission here on Earth -- and it's looking for volunteers.

Simulated missions look at people's psychological and health responses to conditions similar to what astronauts would experience on a deep space mission. In the case of the Mars mission, called Crew Health and Performance Exploration Analog or CHAPEA, the aim is to simulate a Martian environment using a 3D-printed habitat and a set of Mars-related tasks that crew members must perform.

Read more
NASA has collected a whopping 121 grams of sample from asteroid Bennu
A view of eight sample trays containing the final material from asteroid Bennu. The dust and rocks were poured into the trays from the top plate of the Touch-and-Go Sample Acquisition Mechanism (TAGSAM) head. 51.2 grams were collected from this pour, bringing the final mass of asteroid sample to 121.6 grams.

When the OSIRIS-REx dropped a capsule in the Utah desert last year, it made headlines around the globe for returning NASA's first sample of an asteroid to Earth. Scientists were eager to get their hands on the sample of asteroid Bennu to learn about the early formation of the solar system, but actually getting at the sample proved to be rather trickier than imagined.

Scientists were able to extract 70 grams of material from the sample canister relatively easily, making it by far the largest asteroid sample ever brought to Earth, but two troublesome fasteners made it difficult to extract the rest of the sample. The team knew it had plenty more sample inside, but it had to be patient as special new tools were constructed that could undo the fasteners without losing a single gram of the precious sample.

Read more