Skip to main content

U.K. company sets a record for world’s largest 3D-printed rocket engine

Orbex

Between SpaceX’s reusable, vertically landing rockets, trips to the far side of the moon, and some halfway serious talk about asteroid mining and Mars colonies, we’re living in an exciting age for boundary-pushing. high-tech space travel. The latest illustration of this? A U.K. startup, Orbex, which recently debuted the world’s largest 3D-printed rocket engine. Produced in one single piece of high spec metal alloy, without joins, the rocket is up to 30 percent lighter and 20 percent more efficient than other similarly sized rockets, as well as being better able to withstand high temperature and pressure.

“3D printing, or additive manufacturing, has come on in leaps and bounds over the past few years — in many ways making this a superior form of parts manufacturing than traditional methods,” Chris Larmour, CEO of Orbex, told Digital Trends. “It is certainly much, much faster, meaning that we could create a new rocket engine in three to four days, which is a huge advantage as we scale rocket development over time. The other big leap forward with this rocket engine is that it is the first commercial rocket engine designed to work with bio-propane, which is a clean-burning and renewable fuel.”

Orbex

The 3D-printed rocket was produced with input from several partners, included 3D-printing company SLM Solutions and bottled butane and propane provide Calor. The finished rocket, complete with 3D-0printed rocket engine, will stand around 56 feet. That’s only around one quarter the size of a SpaceX Falcon 9 rocket, but more than capable of carrying out its mission.

“Prime is a two-stage rocket,” Larmour said. “The first stage of the rocket hasn’t been unveiled yet and will reside at the back of the stage 2 rocket, which was just revealed to the public. The objective of the first stage is to launch the rocket off the ground, and the second stage launches the rocket — and its payload of satellites — into Earth’s orbit. The small satellites that will be deployed will have a range of uses such as earth observation and communications applications, and are often deployed in constellations.”

Orbex is planning for its first launch to take place in Scotland in 2021. It has recruited Switzerland’s Astrocast SA as a customer to launch 10 nanosatellites in 2023 as part of its global Internet of Things (IoT) network.

Editors' Recommendations

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
Need a last-minute Halloween costume? Check out these 3D-printable getups
3D printed Halloween costumes

Still not sure what to dress up as for Halloween this year? Well, instead of frantically scrambling around town looking for the right shop with the right stuff, have you considered 3D printing your Halloween costume? Check out our list of 3D-printable masks and costume pieces to get all geared up for this year's spooking, then fire up that printer.

If you've already finished your costume and want to get started on your scary movie watchlist, we've put together a list of the best horror movies on Netflix.
Squid Game soldier mask

Read more
NASA is testing a 3D printer that uses moon dust to print in space
The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility, and the print heads, plates and lunar regolith simulant feedstock that launches to the International Space Station.

The Redwire Regolith Print facility suite, consisting of Redwire's Additive Manufacturing Facility and the print heads, plates, and lunar regolith simulant feedstock that launches to the International Space Station. Redwire Space

When a Northrop Grumman Cygnus cargo spacecraft arrived at the International Space Station (ISS) this week, it carried a very special piece of equipment from Earth: A 3D printer that uses moon dust to make solid material.

Read more
The best 3D printers under $500
3D printers are finally affordable. Here are the best models under $500
anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2
 
Pros:

Read more