Skip to main content
  1. Home
  2. Emerging Tech
  3. News

Police used facial recognition software to identify the Capital Gazette shooter

Add as a preferred source on Google

The day after the deadly shooting left five people dead in the newsroom at Capital Gazette, a seemingly unusual fact has emerged about how police identified their suspect.

According to The New York Times, ABC News, and others, after capturing the suspect, Jarrod Ramos, authorities used facial recognition technology to identify him.

Recommended Videos

After he was in police custody, Ramos refused to cooperate with authorities. He at first evaded identification when the fingerprint scanning machine malfunctioned, causing police to speculate that he’d filed off his fingerprints prior to the attack. With an uncooperative suspect and malfunctioning fingerprint machine, investigators were left to use other methods to ID him.

Local police sent an image of Ramos to the Maryland Combined Analysis Center, Anne Arundel County Police Chief Timothy Altomare told reporters, which then compared the image to photos of known offenders contained in the Maryland Image Repository System (MIRS) database. MIRS contains more than ten million photos, including those of known offenders and every driver’s license photo in Maryland. It can also access the mug shot database maintained by the FBI, which contains some 25 million faces.

Ramos had previously been convicted of harassment and was likely present in the database.

MIRS photos have helped Maryland authorities identify criminals in the past. A robbery suspect was caught after police compared an Instagram photo to the state DMV database, which linked them to the suspect. Facial recognition is also used at DMVs around the country, reports The Verge, to minimize ID fraud and duplicates.

Catching and identifying criminals is obviously essential but if you’re worried about the connection between facial recognition technology and the steady creep of surveillance into every aspect of our society, you’re not alone. Privacy advocates have challenged this use of facial recognition, calling it a threat to civil liberties. One concern is that, although authorities are instructed to remove the photos of people who’ve been arrested but found innocent, systems like MIRS aren’t often inspected to ensure that’s the case.

Facial recognition technology has been in the news lately after the American Civil Liberties Union revealed that police departments were testing Amazon’s facial recognition software in the field.

Dyllan Furness
Former Contributor
Dyllan Furness is a freelance writer from Florida. He covers strange science and emerging tech for Digital Trends, focusing…
Anker just exposed a big problem with portable power stations
Appliance, Device, Electrical Device

When you're shopping for a portable power station, there's one number that's almost impossible to ignore: battery capacity. A 2 kWh battery should give you roughly 2 kWh of usable power, right? Unfortunately, things aren't quite that simple. Anker SOLIX has published new efficiency data for its S Series portable power stations, and it's putting the spotlight on something that doesn't get nearly as much attention as capacity: how much of the energy stored inside the battery actually makes it to your devices.

According to Anker, portable power stations are commonly advertised with efficiency figures measured under relatively heavy loads, where they can reach roughly 89% to 92% efficiency. But that's not necessarily how most people use one during an outage. Think about what you'd actually plug in. A Wi-Fi router might sip power continuously, a refrigerator switches its compressor on and off throughout the day, and a CPAP machine could run overnight. Together, those devices may draw just a fraction of what a large power station is capable of supplying. And that's where efficiency can start slipping.

Read more
OpenAI’s first gadget sounds like a tiny expressive AI companion
The device will have a doughnut-shaped body, built-in cameras, and moving parts
OpenAI press image

For months, reports have suggested that OpenAI’s first hardware product would be a screen-free smart speaker designed to act more like an AI companion. We already knew it could understand its surroundings, be carried around the home, and proactively help users. A new Bloomberg report now gives us a clearer picture of what the device may actually look like.

As per the report, OpenAI’s first gadget will be shaped like a doughnut and measure about the same size as a hockey puck. You will be able to carry it between rooms or leave it nearby on whatever surface is convenient. The device is expected to be on the expensive side, as the company has pondered pricing it around $300 to $400. A release is currently planned for 2027.

Read more
Google Antigravity just built an AI translator that works without the internet
Electrical Device, Switch, Robot

Google has shown off a new AI project that could make language barriers a little less intimidating, and it doesn't need an internet connection to do it. The company has introduced the Gemma Translator, a compact prototype built in collaboration with Antigravity. Unlike most AI translation tools that rely on cloud processing, this device runs entirely offline using Gemma 4 E2B, Google's lightweight open model. Everything happens locally on the device, making it both portable and independent of an internet connection. The prototype is powered by a Raspberry Pi 5 and includes a microphone and speaker inside a custom 3D-printed enclosure, creating a self-contained translator you can carry almost anywhere.

AI translation, without the cloud

Read more