Skip to main content

How to use the Privacy Shield on Arlo cameras

Many Arlo cameras are equipped with built-in privacy shutters, including the new Arlo Essential Indoor Camera (Gen 2). Officially known as a Privacy Shield, this can be activated to physically block the lens of your security camera – ensuring no prying eyes gain a view of your home. But how do you use the Privacy Shield on Arlo cameras? And can it be controlled remotely through the Arlo smartphone app?

Here's a closer look at how the feature works.

Difficulty

Easy

Duration

10 minutes

What You Need

The Arlo Essential Indoor Camera (Gen 2) with the Privacy Shield enabled.
Arlo

How to use the Privacy Shield on Arlo cameras

The Arlo Privacy Shield can only be activated through the smartphone app. In other words, there's no physical button on the camera that allows you to block its lens. While some might lament the design choice, this is a safety precaution to prevent intruders or strangers from turning the camera off without your permission.

With your Arlo app in hand, here's how to use the Privacy Shield.

Step 1: Go to the Dashboard.

Step 2: To enable the Privacy Shield, select Standby. By default, the Standby mode is designed to pull up the Privacy Shield. For some products, Arm Home will also pull up the Privacy Shield.

Step 3: To disable the Privacy Shield, select Arm Away.

Step 4: If your camera is connected to a base station, arming or disarming your entire system will perform the same actions as above. If you'd like to just control the camera, you'll need to connect your device directly to your Wi-Fi router and bypass the base station.

Step 5: You can also navigate to the Devices tab and enter a live feed of your property. This will automatically deactivate the Privacy Shield.

Keep in mind that these steps may vary slightly depending on which version of the Arlo app you're running, but the key is to remember that disarming your system will enable the Privacy Shield and arming your system will disable the Privacy Shield. Also, note that the camera makes an audible clicking sound when activating or deactivating (which can disturb sleeping dogs or children).

Editors' Recommendations

Jon Bitner
Jon Bitner is a writer covering consumer electronics, technology, and gaming. His work has been published on various websites…
Roku (yes, Roku) make a home security camera, and it’s discounted today
The Roku Smart Home Indoor Camera on colored background.

Roku might not seem like the first brand you think of when it comes to security camera deals but you’ll be surprised how cheaply you can get a security camera at Walmart right now thanks to the discount going on. Currently, you can buy the Roku Smart Home Indoor Camera SE 2-pack for just $35 instead of $50 so you’re saving $15 while scoring some great cameras for less. Want to know more? Here’s everything we know.

Why you should buy the Roku Smart Home Indoor Camera SE 2-pack
Roku doesn’t feature in our look at the best home security cameras but don’t let that put you off. It has everything you could need from inexpensive indoor security cameras. Each camera enables you to see an entire area with 1080p HD picture in full colour. That includes at night, all via the Roku Smart Home app. It’s possible to set specific motion detection zones so you can cut down on false alerts while the camera can detect motion or sound with smart sensors even detecting body heat so you won’t see them be activated by something like a curtain moving in the wind.

Read more
How to reset the Nanoleaf Skylight
The Nanoleaf Skylight lighting up a room various shades of purple.

The Nanoleaf Skylight is a unique piece of hardware. Unlike most Nanoleaf products that are quick to install or easy to move and replace, the Skylight is designed as a permanent fixture in your home. Instead of simply plugging it into an electrical outlet, you'll need to hardwire it onto your ceiling – and once it's in place, you'll want it to stay there for years.

However, like all electronics, it's possible for your Nanoleaf Skylight to start acting up. And since there's no easy way to get the entire unit down from your ceiling, you might be wondering how you can quickly solve the problem. Thankfully, Nanoleaf designed a simple way for you to reset the Nanoleaf Skylight without the need to disassemble the entire setup.

Read more
SimpliSafe is now using AI to prevent burglars from entering your home
A SimpliSafe outdoor camera monitoring a stranger.

SimpliSafe rolled out the Smart Alarm Indoor Camera in 2023, which coupled AI technology with live monitoring to better protect the inside of your home. The company is now looking to expand those features to outdoor cameras, with Live Guard Outdoor Protection rolling out to early access users before seeing a full-scale launch later this year.

Live Guard Outdoor Protection works much like the Smart Alarm Indoor Camera does, though it's been modified to work outside. When your system is armed, cameras equipped with Live Guard Outdoor Protection will use AI to identify threats on your property. If AI finds something suspicious, the event will be escalated to SimpliSafe's professional monitoring team, who can then intervene via two-way audio to let the intruder know they're being filmed. They can also trigger a siren or request police dispatch.

Read more