Skip to main content
  1. Home
  2. Space
  3. News

NASA receives signal from Perseverance’s landing sensors

By

NASA’s Perseverance rover was launched on its mission to Mars this summer, with the rover and its helicopter companion Ingenuity tucked away in their protective aeroshell inside the Mars 2020 spacecraft. After a small initial issue where ground control struggled to make contact with the spacecraft due to it being in safe mode, which is automatically activated under certain circumstances and is not a cause for concern, NASA was able to establish contact with the craft and track it on its journey.

But there’s another part of the communication system which needed to be checked as well. The Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) suite is a set of sensors that will monitor the spacecraft and allow the rover and helicopter to land on Mars. And NASA personnel on the ground needed to ensure they could communicate with MEDLI2, which they checked in a test called the cruise checkout.

Recommended Videos

During this checkout, the team at the Flight Mission Support Center at NASA’s Langley Research Center in Hampton, Virginia, received a signal from the MEDLI2 system for the first time since launch, confirming that everything was working and looking good for the landing in February next year.

Related

“This is the first time MEDLI2 has been tested since before launch,” Henry Wright, MEDLI2 project manager, said in a statement. “The test went great; we got the data we wanted, and everything looks like we predicted it would.”

MEDLI2 sensors are installed on the Mars 2020 heat shield and back shell prior that will protect NASA's Perseverance rover on its journey to the surface of Mars.
MEDLI2 sensors are installed on the Mars 2020 heat shield and back shell that will protect NASA’s Perseverance rover on its journey to the surface of Mars. Lockheed Martin

To test out the MEDLI2 system, the engineers powered on the electronics and sensors, making sure that they were taking measurements and transmitting them as required for their role in the nail-biting final descent to Mars.

“With this verification that MEDLI2 survived launch and the cold of deep space, the team is excited to support the Perseverance rover’s landing in February,” Wright said.

The Perseverance rover and its helicopter companion Ingenuity are expected to land on February 18, 2021, in the Jezero crater. The rover will search for signs that there was once life on the planet by examining the crater, which is the dried-up basin of an ancient lake.

Editors' Recommendations

Topics
Georgina Torbet
Georgina Torbet
Space Writer
Georgina is the Digital Trends space writer, covering human space exploration, planetary science, and cosmology. She…
NASA’s wild plan to launch a rocket from Mars is ‘like something from an amusement park’
An illustration shows a rocket tossed in the air from the surface of Mars and igniting.

When it comes to missions to Mars, NASA has been on a winning streak in recent decades. Its Spirit, Opportunity, Phoenix, Curiosity, InSight, and Perseverance missions have all landed successfully on the Martian surface, and we're learning more than ever before about how to land on and explore the planet safely. The agency’s next plans for Mars, however, are a whole new level of ambitious. The Perseverance rover has been collecting samples of Mars dust and rock as it travels around, and the aim of the Mars Sample Return mission is to get those samples back to Earth.

The exact design of the mission has changed since it was first announced, but the current plan involves sending a lander to the surface called the Sample Return Lander (SRL) and then getting Perseverance to drop off the samples at this lander. Those samples will be loaded into a rocket inside the lander called the Mars Ascent Vehicle, which will launch into Mars orbit, where it will rendezvous with a spacecraft called the Earth Return Orbiter, which will bring those samples back to Earth.

Read more
Perseverance rover catches footage of a dust devil on Mars
mars 2020 perseverance rover

Many of the weather events we experience here on Earth can be found on other planets too, and that includes whirlwinds. Several missions have observed small whirlwinds called dust devils on Mars, and the Perseverance rover recently captured footage of one such dust devil in action as it rolled across the martian surface.

The footage was captured by one of Perseverance's black-and-white navigation cameras, called Navcams, and shows a dust devil moving at a speed of around 12 mph across a regions known as the Thorofare Ridge. You can clearly see the dust devil as a white column moving across the top of the ridge in an animation posted by NASA's Jet Propulsion Laboratory, which manages the rover.

Read more
NASA’s Perseverance rover shows off its latest Mars find
mars 2020 perseverance rover

NASA’s Perseverance rover is continuing to explore Mars’ Jezero Crater in its search for evidence of ancient microbial life on the distant planet.

The vehicle -- NASA’s most technologically advanced rover to date -- arrived on the red planet in February 2021 in a breathtaking landing captured by high-definition cameras.

Read more