Skip to main content

FCC planning to open white spaces for ‘super Wi-Fi’

Image used with permission by copyright holder

It’s been years coming, but the Federal Communications Commission appears ready to vote on regulations governing the use of spectrum gaps so they can be used for high-bandwidth mobile services, kind of a “super Wi-Fi.” The regulatory framework would approve the use of devices that operate in spectrum space normally reserved for television—so long as those devices don’t interfere with broadcast television or technologies like wireless microphones, they would be able to offer high-bandwidth wireless services.

A vote could come on September 23.

The regulations up for vote would open up spectrum white spaces for free, unlicensed use in a manner similar to the way frequencies currently being used for short-range Wi-Fi and Bluetooth operate. Wireless equipment makers are particularly keen to move into white spaces because, unlike existing Wi-Fi and Bluetooth services, signals in this spectrum space easily penetrate walls can can travel for miles—just like broadcast television. There’s also the bandwidth to consider: white space technologies should be available to deliver wireless bandwidth in the range of 15 to 20 megabits per second, putting it on par with many wired broadband technologies. Whitespace technologies could be very important for bringing broadband to rural areas and other regions underserved by existing broadband technologies.

To address interference issues, the proposed regulations would have installers required to configure white-space equipment to use frequencies that are unused in a particular area—due to the scattershot and varied availability of broadcast television across the country, there is no single set of whitespace frequencies that can be used uniformly throughout the United States. Alternatively, whitespace devices could configure their frequency use using location-aware technologies: the devices could use, say, GPS coordinates to look up their current location in a central database, then configure their frequencies to match whitespaces in their current location.

The wireless industry has wanted the FCC to mandate that whitespace devices include spectrum-sensing technology that would automatically detect what areas of the spectrum are currently in use in an area and prevent the devices from using those spectrums. The fear is that whitespace devices could interfere with television reception and emergency communications. The FCC has, so far, omitted requirements that whitespace devices include spectrum-sensing gear.

The FCC regulations also aim to set aside at least two channels for use of short-range wireless microphones, which operate in the same frequency bands. Wireless mics are frequently used by music performers, theaters, speakers, officials, and other public presenters.

Editors' Recommendations

Geoff Duncan
Former Digital Trends Contributor
Geoff Duncan writes, programs, edits, plays music, and delights in making software misbehave. He's probably the only member…
How to apply and clean off thermal paste
Thermal paste application on CPU.

If you're building a computer, you need thermal paste, or heat paste, to ensure that your computer's processor doesn't overheat. It's a gloopy, silvery material that you squirt between the processor and the cooler to fill in all the micro cavities in their surfaces, which enables a more efficient transfer of heat from the processor to the cooler. The best thermal pastes work so well they let your processor run harder and faster, at lower temperatures, making your PC quieter in turn.

You need to replace the thermal interface material every few years, too, so if you haven't opened up your PC in a while, it might be time to give it a spring cleaning. Keep reading to learn how to apply heat paste and how to clean it. Plus, we'll go over other aspects of its use, such as how often you need to reapply it and if there are any alternatives to using heat paste.

Read more
How to check how much RAM you have on Windows and Mac
RAM installed in slots.

You can only know if you have enough RAM, if you know how to check how much you have. Fortunately, doing so is super quick and easy and then you can decide whether you want to upgrade your memory -- here's how to choose new memory sticks -- or whether you have enough for what you need to do.

You certainly don't need to buy more or new RAM just for the sake of it, and if you have enough for what you need, more memory won't make much difference anyway.

Read more
The real reason so many laptops have moved to soldered RAM
The Intel 12th-gen Mainboard upgrade for the Framework Laptop.

The completely redesigned Dell XPS 14 and 16 came out this year as two of the most divisive laptops in recent memory. No, it wasn't just the capacitive touch buttons or invisible trackpad that caused an uproar -- it also moved to soldered RAM. This was a big change from the past, where the XPS 15 and 17 were both celebrated for their upgradability.

Of course, Dell isn't the first to make the transition. In fact, they're one of the last, which is what makes the decision so much tougher to swallow. Where soldered RAM was previously limited to just MacBooks and ultrabooks, it's now affecting most high-performance laptops for gaming as well. Even the fantastic ROG Zephyrus G14 moved to soldered memory this year.

Read more