Skip to main content

This printer doesn’t use ink and can reuse the same piece of paper

Ink isn’t forever, but a new printing method could keep colors from fading over time because it doesn’t use ink. Researchers at the Technical University of Denmark developed a method for printing — in color — by etching microscopic patterns into plastic.

The method, published on May 5, doesn’t use traditional paper either but instead uses a plastic sheet that’s coated with germanium — a chemical element that looks like, and is chemically similar to, silicon. As the laser passes through the material, the germanium melts, etching tiny shapes to make an image. A final coating protects those tiny plastic carvings.

Recommended Videos

So how can miniature carvings in plastic create a colored image? The human eye perceives color based on reflected light — bounce a red light off a white object, and that item is going to look red. What the researchers discovered is that by adjusting the shape of each microstructure, they could change the wavelength of light that mini carving reflects, creating the perception of color.

The colors don’t resemble a traditional photograph — they appear to more closely resemble a film negative in their odd colors — but the unusual printing method could lead to a number of new advantages. First, the resolution of the resulting image is incredibly high. While a typical printer will use 5,000 dots per inch, the laser printer uses 127,000 in the same space. Besides just giving prints more detail, that high resolution could be used to make tiny watermarks, perhaps turning something like the raised stamp on an official birth certificate into a small but detail-heavy dot.

The printer is also capable of creating an image as small as 50 micrometers — which is smaller than even a single pixel on an HD display. Eventually, the technology could also lead to 3D displays. Oh, and the printer can re-melt a used piece of the plastic “paper” which takes recycling to a whole new level.

Hillary K. Grigonis
Hillary never planned on becoming a photographer—and then she was handed a camera at her first writing job and she's been…
Sebastian Stan lays out Bucky’s future after Thunderbolts
Sebastian Stan in Thunderbolts.

There are some spoilers ahead for the ending of Marvel's Thunderbolts. Stop reading now if you don't want to be spoiled.

Earlier this year, Captain America: Brave New World briefly introduced a new direction for James "Bucky" Barnes, a character Sebastian Stan has been playing since 2011 in Captain America: The First Avenger. In Brave New World, the former Winter Soldier apparently retired from being a reformed hero and went into politics by running for Congress. Thunderbolts reveals that Bucky won his election to the House of Representatives. But his stay in Congress was short.

Read more
Jeep Compass EV breaks cover—but will it come to the U.S.?
jeep compass ev us newjeepcompassfirsteditionhawaii  4

Jeep just pulled the wraps off the all-new Compass EV, and while it’s an exciting leap into the electric future, there's a catch—it might not make it to the U.S. anytime soon.
This is a brand new electric version of the Jeep Compass, and being built on Stellantis' STLA platform—the same architecture underpinning models like the Peugeot E-3008 and E-5008—it looks much slicker and packs a lot more inside than previous versions of the Compass.
Let’s start with what’s cool: the new Compass EV is packing up to 404 miles of range on a single charge, a 74 kWh battery, and fast-charging that gets you from 20% to 80% in about 30 minutes. Not bad for a compact SUV with Jeep's badge on the nose.
There are two versions: a front-wheel-drive model with 213 horsepower and a beefier all-wheel-drive version with 375 horsepower. That AWD setup isn’t just for looks—it can handle 20% inclines even without front traction, and comes with extra ground clearance and better off-road angles. In short, it’s still a Jeep.
The design's been refreshed too, and inside you’ll find the kind of tech and comfort you’d expect in a modern EV—sleek, smart, and ready for both city streets and dirt trails.
But here’s the thing: even though production starts soon in Italy, Jeep hasn’t said whether the Compass EV is coming to America. And the signs aren’t promising.
Plans to build it in Canada were recently put on hold, with production now delayed until at least early 2026. Some of that might have to do with possible U.S. tariffs on Canadian and Mexican vehicles—adding a layer of uncertainty to the whole rollout.
According to Kelley Blue Book, a Stellantis spokesperson confirmed that the company has “temporarily paused work on the next-generation Jeep Compass, including activities at” the Canadian plant that was originally meant to build the model. They added that Stellantis is “reassessing its product strategy in North America” to better match customer needs and demand for different powertrain options.
So while Europe and other markets are gearing up to get the Compass EV soon, American drivers might be left waiting—or miss out entirely.
That’s a shame, because on paper, this electric Jeep hits a lot of sweet spots. Let’s just hope it finds a way over here.

Read more
Charlie Cox singles out his least favorite Daredevil: Born Again episode
Charlie Cox in Daredevil: Born Again.

Daredevil: Born Again season 1 was largely reconceived after the 2023 actor and writer strikes. Dario Scardapane -- a veteran of The Punisher series on Netflix -- was brought in to be the new showrunner and he made a lot of changes to the series that were well-received. However, there's one episode that Scardapane didn't really change at all, and it happens to be the least favorite episode of Daredevil: Born Again's leading man, Charlie Cox.

During an appearance on The Playlist, Cox noted that he wasn't very fond of the season's fifth episode, "With Interest," which was a largely standalone episode that featured his character, Matt Murdock, in a bank during a hostage crisis.

Read more