Skip to main content

Biologists just made infertile mice fertile again by giving them 3D printed ovaries

Mice with implanted 3D printed ovaries birthed healthy pups
Rashid Valitov/123RF.com
Scientists at Northwestern University have successfully implanted functional, 3D printed ovaries into lab mice that had their own ovaries removed. Once the female mice received the 3D printed ovaries, they redeveloped a monthly cycle and were able to give birth to healthy pups. The procedure has only been tested in mice so far, but the scientists involved say they developed the fertility solution with humans in mind. Hopefully, 3D printed ovaries could soon become a viable option for women seeking infertility treatment.

In order to successfully 3D print the ovary, there were three requirements the scientists needed: oocytes ( immature egg cells), the hormone-releasing cells that support oocyte growth, and a flexible but strong structure that would be able to support the development of the cells into a functional organ. The base structure for the ovary was 3D printed from gelatin, which is found in Jell-O in its most famous form but is also made from animal skin. The team tested various configurations and sizes of the cell scaffold in order to determine the most viable design, which was formed by solid struts in a criss-cross pattern.

3d printed ovary builds from oocyte cells
Sebastian Kaulitzki/123RF.com
Sebastian Kaulitzki/123RF.com

The multiple anchor points of the criss-cross scaffold made it a friendly environment for oocyte cells to latch on and grow healthily. Scientists introduced ovarian follicles to the scaffold, because each follicle contains the oocyte cell and the supporting cells within its round structure. After implantation, mice that had previously had their ovaries surgically removed restored their hormonal cycles, ovulated, gave birth to healthy mouse pups, and were even able to nurse their pups until it was time to wean them.

As many as 1.5 million women are infertile in the United States alone, according to the CDC. The scientists that developed the 3D printed ovary hope that its successful trial in mice is a promising development towards a practical human application, although the transition may be a long way off. Even the development of a hormonal cycle in mice with the implanted ovaries could be a huge benefit for human applications, since hormone imbalance can often be linked with infertility and the hormonal system is involved in so many measures of health in the body.

In order for the implant to work in humans, the 3D printing process will also need to incorporate stem cell technology. But scientists on the study believe that transitioning from skin cells to stem cells will be a relatively easy process thanks to 3D printing. Since the rigidity and structure of the artificial ovary proved so important in successful trials in mice, the Northwestern team believes that they will be able to customize a structure appropriate for humans with the same 3D printed approach.

Chloe Olewitz
Chloe is a writer from New York with a passion for technology, travel, and playing devil's advocate. You can find out more…
The best 3D printers under $500
3D printers are finally affordable. Here are the best models under $500
anycubic photon review 3d printer xxl 2

The 3D printing market has seen quite a few changes over the last few years. In just the span of a decade, the barrier to entry has dropped from well over several thousand dollars to under $200 in some cases. However, all entry and mid-level printers are not made equal. We have a few suggestions for prospective buyers and other information regarding alternatives not found on this list.

To some veterans of the 3D printing scene, this list may seem like it lacks a few of the most commonly recommended printers for newcomers. This is by design. Our list only considers printers with tested components from proven, reliable vendors. That's why we chose the Monoprice MP Mini v2 as our top pick--it's reliable and easy to use. We have avoided any printer with a frame primarily made from interlocking acrylic pieces and anything historically unreliable.
Most bang for your buck: Monoprice MP Mini v2
 
Pros:

Read more
Ceramic ink could let doctors 3D print bones directly into a patient’s body
ceramic ink 3d printed bones bioprinting australia 2

Scientists use a novel ink to 3D print ‘bone’ with living cells

The term 3D bioprinting refers to the use of 3D printing technology to fabricate biomedical parts that, eventually, could be used to create replacement organs or other body parts as required. While we’re not at that point just yet, a number of big advances have been made toward this dream over the past couple of decades.

Read more
The future of making stuff: Inside the evolution of 3D printing with Formlabs
future of 3d printing formlabs ces 2021 castablewax40

When 3D printing went mainstream in the mid-2010s and exploded in popularity, it was about as hyped up as it possibly could be. Evangelists told us it would fundamentally transform the way goods were made, and usher in a bold new era of creative freedom. Soon, they said, we’d be able to fabricate anything we wanted on-demand, Star Trek replicator style, right from the comfort of our own homes.

But of course, 3D printing didn't really live up to that high-flying dream. Instead, it made a momentary splash and then largely returned to the fringes, gaining adoption in hobbyist workshops and cutting-edge product design labs, but not really changing the face of manufacturing in the way many hoped it might.

Read more