Skip to main content

Georgia Tech researchers upgrade robot arm with point-and-click interface

Georgia Tech Creates Point and Click Method for Controlling Robots
The Georgia Institute of Technology has developed a new, intuitive method for controlling a robotic arm: Point and click. While not exactly like the adventure games of old, it definitely draws its inspiration from the ability to highlight objects and perform a small selection of preselected tasks.

Although typical robotic arm controls offer a wide variety of options thanks to six degrees of motion, that can be cumbersome for people just getting to grips with the technology. What the new solution looks to do, is make it possible for novice robotics owners to utilize the technology in a manner that has a much shorter and shallower difficulty curve.

“Roboticists design machines for specific tasks, then often turn them over to people who know less about how to control them,” said David Kent, a Georgia Tech robotics doctoral student who headed up the project. “Most people would have a hard time turning virtual dials if they needed a robot to grab their medicine. But pointing and clicking on the bottle? That’s much easier.”

While simpler on the surface, such a system is a lot more complicated under the hood. Instead of displaying 3D information to the user, they simply offer a video feed. However, the arm itself needs to understand the 3D environment and know that when a person clicks on an object in the background and tells it to pick it up, it must differentiate that from objects in the foreground. It needs to know the distance that it must travel and the correct angle to “attack” it from.

The algorithm that the research team has come up with is capable of analyzing the geometry of objects, even making assumptions about them when the camera can’t see their entirety. This is something that the human brain does automatically, the researchers explained, but it was a challenge to make the robotic arm infer that detail for itself.

Although this technique of control does bequeath much of the responsibility of control to the algorithm and the arm, the system is actually less error prone than giving humans full control. In a trial, researchers found the point and click method delivered only one mistake per task, whereas the more traditional six degrees of motion control method had as many as four per task.

By giving users control over what to grab and how to do so when the arm is in the right position, researchers hope that robotic technology could more easily be adopted by those without training, or with limited mobility themselves, like the elderly. There are also potential applications for such robotic arms in sensitive settings, like search and rescue operations or in space travel.

Editors' Recommendations

Jon Martindale
Jon Martindale is the Evergreen Coordinator for Computing, overseeing a team of writers addressing all the latest how to…
What to do if your Intel CPU keeps crashing
Pins on Core i9-12900K.

Despite being among the best processors you can buy, some high-end Intel CPUs have faced a wave of instability over the past few months. Intel is investigating the problem, but the company and its motherboard partners have already worked toward some temporary fixes to improve stability on high-end Intel CPUs -- even if it comes at a performance cost.

Before getting into the fixes, keep in mind that they are temporary. Intel will release a statement on the instability soon, likely with more direct guidance on what affected users should do. In addition, the scope of the problem isn't clear -- if you're not experiencing issues, you shouldn't have anything to worry about.
Who's affected

Read more
HP Envy deals: HP’s most popular laptop starts at $630
An HP Envy 17-inch laptop sits on an office desk.

HP is one of the best laptop brands in the laptop space, with a huge selection of laptops to pick from, including some of the best laptops on the market. More specifically, though, the HP lineup is probably at the top when it comes to versatile and relatively well-valued laptops. While there are quite a few variations and configurations of the HP Envy, we've gone ahead and put together the ones that we think will give you the most bang for your buck. That said, if you haven't found something you're specifically looking for, be sure to check out some of these other great laptop deals as well.
HP Envy x360 2-in-1 laptop 15Z-FH000 — $650, was $900

The HP Envy x360 convertible laptop is a great option for just about anyone, particularly anyone who enjoys the touchscreen functionality of a tablet. It’s well designed and super slim, making it a truly go-anywhere device. Despite its portability, it still has an immersive 15.6-inch touchscreen that’s great for creators, note-takers, and binge watchers. Top notch build quality and durability, fast charging technology, a fingerprint reader, and great battery life round out the top features of the HP Envy x360 convertible touchscreen laptop. It competes well with the best 2-in-1 laptops. Its versatility and all-around capability make it a worthy companion on any desk, and on any lap.

Read more
I use these simple printer tips to save money on ink and toner
Printing is fast and economical with the HP Smart Tank 7602.

The cost of a printer can range from under $100 for some good, low-cost inkjet printers to several hundred for the best color laser printers. However, the price you pay upfront doesn’t include paper, and the included ink and toner only lasts so long.

A bargain printer can end up costing you more overall if the cartridges are small and replacements are expensive. Follow these tips to minimize ink, toner, and paper waste, reducing the ongoing expense of using your printer in the long run.
Print in monochrome
Adobe Acrobat's print settings includes a grayscale option. Digital Trends

Read more