Losing suction is one of the worst problems a vacuum cleaner can develop. You’ll notice it happening immediately as hair and crumbs start getting left behind or it takes two passes to clean where it used to take only one. It may be especially noticeable if your Shark vac stops collecting larger pieces of debris like spilled kibble.
Sometimes these events are a sign that you need to get a new vacuum, and we can help with that, including some new Shark picks. But if you really like your old Shark model, there are several suction-improving tips that can help. Try these out to fix your suction issues and get years more of life out of your vac!
Clean out the vacuum’s head
Most Shark vacuums have a head where the brush bar rotates and applies suction. This should be your first stop to address suction issues. Clean any junk or tangles out of the brush bar (a pair of pliers and scissors can help), and check for any masses that are creating blockages around the head. Shark vacuums usually let you remove the brush bar entirely by lifting the “lid” section of the cleaning head by using a nearby button dedicated to detaching the bar.
Once you complete those steps, try to use your Shark vac again. If performance is greatly improved, that was probably the source of your problem.
Fully empty the dust bin and clean the air filters
Drag your vacuum to the kitchen, then remove the dust bin/cup and empty it into the trash. Many Shark vacs also use an air filter or two to help trap dust. Take these out as well, and inspect them. Most can be washed in the sink to clean them, although some are disposable and should be replaced with a new model. Wash your filters until the water runs clean, and then leave them out to dry for at least a full day.
When the filters have dried, put everything back together and test your vac again. Dirty filters can clog your vacuum and impede suction if left for too long. HEPA or HEPA-like filters for very small particles can get clogged with surprising speed, so it’s important to keep an eye on them.
Check the hose for any clogs
If your Shark vac has a hose, feel along the length for any lumps. That indicates a clog that’s causing your suction issues.See if you can break the clog by applying gentle pressure with your hands, or gently move it to the end of the hose to remove it. If not, detach the hose entirely and use something like a stake or broom handle to slowly push the clog out, being careful not to damage the hose. You can also try pouring a mix of white vinegar and baking soda (half a cup each) into the hose and shaking it, but this only works on some kinds of clogs.
Check the cleaning head height
If your Shark vacuum has an adjustable cleaning head that can be put at several different heights, take a close look at the setting. The height may have gotten accidentally adjusted to a higher level, which means the vac won’t perform as well. Try lowering the height and see if this restores your expected suction.
Look for cracks or leaks
Suction also depends on the integrity of your Shark vac. If there are any leaks that allow air to escape, this can drastically decrease your suction performance. Carefully check the hose and frame for any cracks or gaps that could be leaking air out. Make sure you check all hose segments, as Shark vacuums may come with more than one hose section.
Sometimes you’ll discover gaps that can be fixed, such as covers that aren’t fully closed or dust bins that weren’t completely reattached. These are simple fixes. But in other cases, there could be permanent damage to the hose or frame. If that happens, it may be a good idea to start looking for a new vacuum cleaner instead of attempting repairs.
Take a look at charging conditions
Some Shark models use an internal battery that needs to be recharged from time to time. If this is the case, check your battery charger to make sure it is working properly, connecting to the battery properly, and that the connectors are not dirty or damaged. If it’s been a few years since you started using the vac, you may need to buy a new battery. A weaker battery will lead to lower suction, something you can usually tell simply by listening to the motor when you turn the vac on.
Finally, if you want a vacuum that will never let you down when it comes to suction power, we suggest taking a look at our best Dyson vac picks.
Editors' Recommendations
- What to know before connecting the Roborock S8 MaxV Ultra to your drainage system
- Roborock S8 MaxV Ultra vs. Narwal Freo X Ultra: Which is the best premium robot vacuum?
- The Narwal Freo X Plus is an entry-level robot vacuum loaded with premium features
- How to save Ring Doorbell video without a subscription
- Best washer and dryer deals: bundles from LG, Samsung and more
