Do your earbuds feel as if they aren’t working as well lately? Before you ditch them in the trash and doll out money for a new pair, you should try cleaning your earbuds. Even if you take great care of your headphones, dirt, debris, and ear wax can build up over time.
Keep in mind that cleaning your earbuds requires a gentle touch, which is why we’ve provided a how-to-guide for you.
Disconnect the earbuds
Earbuds typically draw power from the phone or device they’re connected to. Before cleaning them, make sure they’re unplugged. The chances of getting electrocuted here are infinitesimal but better safe than sorry. Plus, if you somehow short out the earbuds themselves, at least your device won’t get zapped.
Assess the damage
Your method of cleaning may depend upon just how dirty those earbuds are — and where that dirt (or gunk, etc.) resides. More often than not, you’ll be dealing with a buildup of earwax (and other gross stuff) on the grilles from which sound is emitted. With most earbuds, you can remove the eartip (the little silicone or foam part that goes into your ear canal) to get a better view.
If most of the nasty stuff is on the mesh grille, you’ll need to be very careful here. If that part is mostly clean, you can pretty much scrub the rest with impunity.
Below are several different methods for cleaning earbuds. None of these solutions are going to be expensive, but you might need to spend a few dollars if you’re worried about damaging some pricier earbuds.
Note: Don’t submerge your earbuds in any liquid, ever. It could work, but even if they are waterproof, there are safer and more effective options.
If you’re working with single-piece earbuds that don’t have eartips, like the new AirPod Pros, you should avoid using soaps, shampoos, or other cleaning materials. These earbuds can be sensitive, so your best bet is to slightly dampen a soft, lint-free cloth and simply wipe them clean. Make sure not to get any liquid in the openings by instead cleaning the microphone and speaker meshes with a dry cotton swab. Let them dry before placing them in the charging case and do not attempt using them before they’re completely dry.
Soap and water
Your first instinct is probably just to create a solution with antibacterial soap and warm water, then use a soft cloth to wipe down your earbuds. Guess what? That’s a great idea! Soap and water will work wonders on the earbuds’ outer casings and wires for a pittance. Fill a bowl with warm water and add a few drops of hand soap or liquid detergent. Dip a soft cotton or microfiber cloth into the solution, wring it out until it’s not dripping, then get to work.
You don’t want to use such a method to clean the gunk off the grilles, though. If water gets inside the earbuds, nothing good can come of it. Best-case scenario, your buds survive a scare. Worst case, they die. If you clean this way, make sure to avoid the input jack, and be careful at the spot where the wire emerges from the earbud itself (as water can sneak in here).
Once the earbuds look clean enough, set them down somewhere to dry for an hour or two, making sure they’re not in a position where water could drip into the buds’ innards.
Rubbing alcohol, aka isopropyl alcohol, is a common cleaning solution. As with soap and water, it’s a fine choice to clean the less fragile components of your earbuds, like the casings and wires. As rubbing alcohol is a little more potent than soapy water, you’ll just need to dip a cotton swab into the bottle, shake it out until it’s almost dry, then start wiping at any dirt or wax on the earbuds.
As with soap and water, you don’t want to use this method to clean the actual grilles, for two reasons. First, you don’t want alcohol dripping into the earbud. Second, cotton swabs are prone to leaving little bits of cotton on anything they touch. Metal filters can trap strands of cotton, making them much more difficult to clean in the long term and even muffling audio.
Again, once finished, set the earbuds somewhere to dry.
Using a toothbrush
For this solution, you’ll want to get a spare toothbrush with nylon bristles — luckily, that’s pretty much every toothbrush these days, and definitely every dollar-store toothbrush — because nylon bristles won’t break off and get stuck in your buds. Also, nylon is anti-static, so it won’t conduct electricity.
Toothbrushes are good choices to clean mesh grilles, as there’s no danger of unwanted moisture finding its way inside, but you’ll need to be extra careful, brushing gently in circular motions and not pressing too hard, else the dirt you’re trying to remove might get smashed down into the grille, making the process much more difficult. Once you’re done, throw the toothbrush away or drop it in the dishwasher to sanitize it. We wouldn’t recommend using it on your teeth.
Credit to Geek Detour for this idea. While toothbrushes can prove too powerful and liquid-based solutions bring other concerns, using a dry adhesive putty such as is a nearly foolproof method for cleaning even the most sensitive parts of your earbuds.
You’ll want to shape the putty so you can press one end onto the mesh grille of the earbud. The putty should grab any dirt or wax and pull it off, though you might need to mess with it a little to make sure it gets in all the little nooks and crannies.
If you find none of the above methods work well enough, you can always employ more than one of these methods in your quest for clean earbuds. Perhaps you can use adhesive putty to get wax off the grille, then tape over the opening and use a soapy cloth to shine up the other areas of the earbuds. If you’re careful, you can even use a needle or pushpin to pull dirt out of hard-to-reach areas (though you don’t want to go too hard here, as you can scratch the buds’ finish).
Most earbuds come with silicone eartips. Some (typically more expensive models) come with memory foam eartips or an accessory pack with different sizes. Cleaning silicone eartips is easy. Just remove the eartip carefully, create a solution of warm, soapy water, and wipe them down with a cloth. As silicone eartips are difficult to damage, the only time you’ll need to be particularly ginger here is when removing them, as some tend to stick. The same goes for silicone ear wings or any other removable silicone parts. Just don’t lose them!
Foam tips, on the other hand, are tough to clean. You can try, but most manufacturers will tell you that foam eartips are disposable and not meant for cleaning. Earwax and buildup will embed itself into the foam, and trying to pick it out can tear the foam, rendering the eartips unusable. We suggest switching to silicone or splurging for a new pair of foam eartips (they’re not that expensive).
Cleaning true wireless earbuds
True wireless earbuds — like the Amazon Echo Buds and Apple AirPods Pro — are becoming more and more popular. So, how do you clean them? Well, the steps above should do the trick. And remember: We don’t recommend submerging them in water and hoping it’ll wash away the muck, even if they are waterproof. Soaking is no substitute for a good scrubbing. Instead, your best bet is to use a toothbrush or adhesive putty to clean them.
- How to clean your AirPods or AirPods Pro
- How to keep your phone or tablet screen clean and hygienic
- How to clean your car’s interior
- How to clean your PS4 controller
- How to clean your TV screen