Monoprice Maker Select Mini V2 review

Monoprice’s $200 3D printer shouldn’t be great, but it is

It's more evolutionary than revolutionary, but Monoprice’s Maker Select V2 still offers a ton of bang for your buck.
It's more evolutionary than revolutionary, but Monoprice’s Maker Select V2 still offers a ton of bang for your buck.
It's more evolutionary than revolutionary, but Monoprice’s Maker Select V2 still offers a ton of bang for your buck.

Highs

  • Affordable
  • Sturdy construction
  • Reliable printing
  • Decent print quality

Lows

  • Small build envelope

A couple years ago, Monoprice took the 3D printing world by storm with a the original Maker Select Mini: a 3D printer that only cost 200 bucks, and had all the bells and whistles we could ever ask for. Now, it’s back with version two of that revolutionary printer — so naturally we took it for a spin to see how it stacks up to the original.

Standout Features and Specs

Monoprice’s V2 builds upon the first generation’s solid set of specs and features by adding a few minor (but important!) upgrades.

Among these improvements is an all metal hot end, which improves heating and helps prevent clogging, as well as a heated/insulated printing bed, which boosts print adhesion and prevents warping.

Along with this improved heated bed, the V2’s build surface also features a special pad material (similar to BuildTak) that promotes adhesion during printing, and also makes parts easy to remove after they’ve finished. Finally, MP also equipped the V2 with an internal cooling fan that helps prevent everything from overheating.

There are also a few things that haven’t changed. Just like the first generation, the V2’s max resolution sits at 100 microns (0.1 millimeters), which is fairly average, but acceptable for the price. Its build envelope is also a perfect 4.7-inch cube, just like it was on the first generation. Again, this spec is somewhat average, but still not bad.

This V2’s setup is quite possibly the easiest we’ve ever encountered.

The all-metal hot end retains the same maximum temperature of 230, which allows you to print with a fairly wide range of filament types, but does limit you from some of the more exotic higher temperature materials. As for inputs and outputs, you can load your models onto the Mini V2 using a Micro SD card, a direct USB connection, or even do it via WiFi through Monoprice’s new mobile app.

All in all, the V2 is certainly more of an evolution than a revolution, but Monoprice’s improvements are smart ones that do big things for the printer’s reliability and overall performance — and it only costs you an extra $20.

Setup and Configuration

The V2’s setup is quite possibly the easiest we’ve ever encountered. It comes completely assembled and factory calibrated, so all you have to do is unbox it and supply some electricity. There’s not even an on switch — just plug it in, and you’re off to the races.

Monopice Select Mini V2
Riley Young/Digital Trends

From there, Monoprice’s super straightforward interface makes the remaining setup steps nearly foolproof. Things like loading filament and fine-tuning the print bed are all extremely simple to execute.

To offer a comparison, we’d say setting up the V2 is about as complicated as setting up a brand new toaster. It’s simple as hell, but it might take a bit of fiddling around before you find the ideal settings that result in that perfect, golden-brown slice of toast.

Design and Build Quality

Lifting this printer out of the box surprised us — it’s astonishingly heavy for its size. This is largely due to the Mini V2’s all-metal construction, which makes it an incredibly sturdy machine that doesn’t wiggle around too much during printing.

Monoprice gave everything a makeover in terms of aesthetics.

It’s also pretty easy on the eyes. Most of the V2’s mechanisms are tucked behind its metal exterior and hidden from view, so the machine doesn’t look as rudimentary and utilitarian as some of its competitors. Better yet, despite the printer’s sleek design and tucked-away components, its inner workings are still easily accessible.

To be fair, we never needed to tinker with the V2 at all during our testing process, but accessible design and easily-replaceable parts are something we love to see on a printer. Ten points to Gryffindor Monoprice.

User Interface and Software

Monoprice scores high marks in this category. Both the onboard software and desktop-based slicer programs are wonderfully simple to use — though the latter isn’t necessarily thanks to Monoprice.

Monopice Select Mini V2
Riley Young/Digital Trends

As with all its printers, Monoprice’s Select Mini V2 is designed to work with whatever slicer program (the software that translates your 3D design into instructions a printer can follow) you desire. We used Cura: one of the most powerful and customizable slicers on the planet, which now includes pre-configured profiles for many of MP’s most popular printers. This makes the whole process extremely convenient, as you no longer have to manually configure your machine.

The onboard user interface similarly straightforward, and hasn’t changed too much since the first generation. The V2 boasts the same knob-based navigation scheme and the same intuitive menu trees — but Monoprice gave everything a makeover in terms of aesthetics.

Suffice it to say you won’t have any trouble using this machine.

Print Performance

Don’t let the price tag fool you — the Select Mini V2 prints like a dream.

Our first print using the Mini was the infamous ‘lucky cat’ model, which Monoprice pre-loaded onto the printer’s SD card. Unsurprisingly, it turned out great, since most models like this are fine-tuned by the manufacturer. So in order to get a better idea of how the V2 performs, we ran it through our standard suite of benchmarks.

Monopice Select Mini V2
Riley Young/Digital Trends

The first of these, as always, was the 3DBenchy: a tugboat-shaped torture test designed to highlight a printer’s strengths, weaknesses, and quirks. Much to our delight, the Mini V2 did a fantastic job. No matter what parameters we set, the tugboat always came out clean, accurate, and very consistent from layer to layer. Some of the superfine details of the boat didn’t come through as clearly as we’d like, but it’s worth noting that nearly all FDM printers struggle in this area, and the Select Mini V2 performed just as well (if not better than) as most printers that cost 10 times as much. Other tricky elements, like steep overhangs and unsupported spans, were also reproduced without any significant errors.

After a couple weeks of printing random (usually Star Wars-related) objects we found on Thingiverse, we found that the Mini V2 is also quite reliable. Whereas some 3D printers leave you feeling worried and unsure if they’ll complete the job, we felt highly confident with this machine.

The only real drawback here is the V2’s relatively small build envelope.

Thanks to the printer’s heated bed and solid construction, it doesn’t often fail mid-print — unless of course you make a slicing error and prepare the model improperly. This printer is still bound by the laws of physics, so we definitely recommend printing with supports unless you’re certain you don’t need them.

All in all, Monoprice’s new-and-improved Select Mini earns high marks for performance. We did experience a few flubs, failures, and funky-looking prints, but these were the exception, not the norm. The V2 prints just as well (and in some respects, even better) than printers with far larger price tags. The only real drawback here is the V2’s relatively small build envelope, which limits the range of objects you can create with it.

Our Take

The Maker Select V2 is definitely more of an evolution than a revolution — but in this case that’s a good thing. Monoprice didn’t need to reinvent the wheel with this machine, and thankfully, it didn’t try to. Instead, it threw on some new tread and made a rock-solid product that’s better than the original — and the original was already pretty great. The V2 might not be the best 3D printer on the planet, but you’ll be hard pressed to find a better blend of price and performance.

Is there a better alternative?

If your main concern is getting the most bang for your buck, then look no further. You won’t find this many features packed into such an affordable package anywhere but Monoprice.

If $220 is too steep for you, we also highly recommend the MP Mini Delta, which is about $60 to $70 cheaper, but does have a slightly smaller build envelope.

If build area is your main concern, then we’d recommend checking out the Monoprice Maker Select Plus — arguably one of the best printers we’ve ever reviewed. In terms of print performance, it’s nearly identical to the Maker Select Mini V2, but it does have a far larger build area that allows you to print much bigger objects. It also has a touchscreen, which is nice.

How long will it last?

If you treat this little guy well, it’ll likely give you a long life in return. Due to its all metal construction, durable components, ample replacement parts, and Monoprice’s continued software support, the Select Mini V2 seems well suited for a long life on your desktop.

Should you buy it?

Yes, yes, a thousand times yes! This printer offers a near perfect blend of price and performance, so if you’ve been waiting patiently for an affordable printer that doesn’t suck, then your time has come.

Emerging Tech

Global Good wants to rid the world of deadly diseases with lasers and A.I.

Global Good, a collaboration between Intellectual Ventures and Bill Gates, aims to eradicate diseases that kill children in developing nations. It tackles difficult problems with high-tech prototypes.
Home Theater

Still listening on tinny, muffled TV speakers? Try one of our favorite soundbars

You no longer have to sacrifice sound for size when selecting home audio equipment. Check out our picks for the best soundbars, whether you're looking for budget options, pure power, smarts, or tons of features.
Product Review

Yuneec’s Mantis Q will make you wish you bought a DJI drone

Yuneec’s high-end drones are arguably the ones to beat in terms of flight control, design, and their photographic capabilities. But the company has struggled to make a low-end drone that’s worth buying, and the Mantis Q is proof of that…
Emerging Tech

NASA’s ‘Refabricator’ lets astronauts recycle 3D-printed tools to make new ones

The International Space Station just received a fancy new gadget in the form of a Refabricator, a machine capable of 3D printing using recycled plastic materials. Here's how it works.
Product Review

Bigger battery and folding top add appeal, but BMW’s i8 remains ultra-niche

Want a high-performance vehicle that's more than just a frightening driving experience? Desire the look and feel of a sports car with the road manners of a luxury commuter? The BMW i8 is for you.
Emerging Tech

Of all the vape pens in the world, these 5 are the best

Vaping concentrates has become significantly more popular, especially among those that use cannabis for medicinal purposes. But don’t use just any vape pen: we found these five devices to be our favorites in 2018.
Emerging Tech

A river of stars one billion years old flows across the southern sky

Astronomers have identified a river of stars flowing across our galaxy and covering most of the southern sky. The estimated 4000 stars that comprise the stream were born together and have been moving together for the last one billion years.
Computing

The HoloLens 2 will be announced at MWC. Here's what we know about it so far

The HoloLens 2 is ripe for an announcement. Here's what Microsoft has revealed so far, what's likely in store for the next generation HoloLens, and everything that we know about this mixed reality headset.
Emerging Tech

Descending at an angle could be key to landing heavier craft on Mars

Landing on Mars is a challenge: The heavier the craft, the more difficult a safe landing becomes. Scientists propose using retropropulsion engines and angling the craft to create a pressure differential to land heavier crafts in the future.
Emerging Tech

Ant-inspired walking robot navigates without GPS by using polarized light

What do you get if you cross Boston Dynamics and Ant-Man? You get Antbot, a robot from the French National Center for Scientific Research (CNRS) which uses ant-like navigation to move around without the aid of GPS.
Emerging Tech

InSight’s heat probe will dig 16 feet beneath the surface of Mars

New images from NASA's InSight mission to Mars have confirmed that the lander succeeded in setting the Heat Flow and Physical Properties Package instrument onto the surface, from where a self-hammering spike will burrow downwards.
Emerging Tech

White spots on Ceres are evidence of ancient ice volcanoes erupting

Scientists are pouring over data collected by NASA's Dawn mission to learn about the dwarf planet Ceres and the bright white spots observed at the bottom of impact craters. They believe that these spots are evidence of ice volcanoes.
Emerging Tech

Awesome Tech You Can’t Buy Yet: Grow veggies indoors and shower more efficiently

Check out our roundup of the best new crowdfunding projects and product announcements that hit the web this week. You may not be able to buy this stuff yet, but it sure is fun to gawk!
Emerging Tech

NASA to launch SPHEREx mission to investigate the origins of our universe

NASA is launching an ambitious mission to map the entire sky to understand the origins of the universe. The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) mission will launch in 2023.